[cwj]

I know alot of guys are interested in knowing what it would take to buy 2X3" lift blocks and create a 2" BL since noone makes one for the newer rangers( mine is a 2004). I personally think 1" isnt worth the time and effort and the 3" is just too much for me they sell the blocks on ebay for $3 a piece and you can find bolts at a hardware store but I didnt know if the clearance issues would be the same as a 3" BL or not has anyone done this or have any insight??

[vista4.0]

Im pretty sure with a 2 inch you have to worry about the steering shaft, and all the grounds. Basically everything you would have to do with a 3inch. 1 inch is as far as you can go with out moving grounds and such.

[evilclown312]

Yeah so if you really wanted a 2in to do it the correct way and make sure its done correctly, buy your blocks and a 3in kit, use your blocks..

[cwj]

I thought about that but was trying to do it as cost effective as possible lol

[evilclown312]

Honestly, when it comes to lifting i would rather spend a little more and get it done right.

[cwj]

Same here but if I were to buy the 3" I would probly just suck it up and put it on instead lol

[evilclown312]

I would just put a 3" on becuase once you get it lifted your going to want it even higher..

[vista4.0]

you will want the 3 inch. Im good with the 1 inch on mine for now. But I dont see that lasting forever lol

[cwj]

Haha True very true My wallet is afraid of what I will want after the 3" lift though lol

[evilclown312]

You need a 3" :)

[vista4.0]

Wirelessly posted (Android)

Hah ya I know this

[evilclown312]

Let me know, and we can set up a meet to get it on there...lol

[vista4.0]

Wirelessly posted (Android)

Lol not anytime soon for me. Back on topic. Just skip the 2 and go 3.