Help!
#1
Join Date: Oct 2005
Location: Marietta, GA
Posts: 758
Likes: 0
Received 0 Likes
on
0 Posts
#4
x2 You need to heat up the cab bolts to melt the thread lock thats on it. Do that and the air gun should remove them with no problems.
#7
#8
HEAT HEAT HEAT HEAT
If you dont have a Mapp gas torch or Propain GO BUY ONE NOW. you need it. the lock tite will fight you the whole way if you dont. heat the ever loving **** out of them from the under side on the cab mounts. if you get them hot enough you shouldnt even need to hold them but being you broke them loose from the rubber you will have to. get them HOT.
enjoy
If you dont have a Mapp gas torch or Propain GO BUY ONE NOW. you need it. the lock tite will fight you the whole way if you dont. heat the ever loving **** out of them from the under side on the cab mounts. if you get them hot enough you shouldnt even need to hold them but being you broke them loose from the rubber you will have to. get them HOT.
enjoy
#9
reading the tech I posted a while ago will also give alot of helpful tips to speed the process up
Thread
Thread Starter
Forum
Replies
Last Post