3" long stud radiator bracket
#1
3" long stud radiator bracket
i got my kit in last week and checked it to make sure all the parts were there it was missing (1)-5/16" x 1" bolt (1)-5/16" nylock nut and (1) 3" long stud radiator bracket so i called performance accessories and they said they would send them out right away i got them tonight and checked them out they sent the right nut and bolt but they sent me a 3" short stud bracket(ground extention) the only difference in the two are the lenght of the stud so here are my questions
1. is the stud long enough to use as a radiator bracket?
2. the stud looks like its just pressed in is it?
3. can i press it out and press a bolt in?
4.if i do that will there be room for the bolt head or should i cut the head off and weld the backside?
i need to know before saturday thats when my bodylift is going on
any help will be greatly appreciated thank you
1. is the stud long enough to use as a radiator bracket?
2. the stud looks like its just pressed in is it?
3. can i press it out and press a bolt in?
4.if i do that will there be room for the bolt head or should i cut the head off and weld the backside?
i need to know before saturday thats when my bodylift is going on
any help will be greatly appreciated thank you
Thread
Thread Starter
Forum
Replies
Last Post
njdriver04
SOHC - 2.3L & 2.5L Lima Engines
6
01-13-2012 01:34 PM
Needforspeed3685
General Technical & Electrical
14
08-16-2007 05:05 PM
n3elz
General Technical & Electrical
26
12-09-2004 04:55 PM