Quick 1" Body Lift Question
#1
Quick 1" Body Lift Question
I see that all the links to 1" Body Lift suppliers in the Sticky dont work. The ebay store doesnt exist anymore. They have two different 1" blocks available here https://www.shopatron.com/index/706.2.2477.0.0.0.0, but I have no clue which one is used for the Rangers. Any help would be appreciated
#2
Either one will work fine one is just wider around then the other.. i would go for the wider one IMO.
actually IMO i wouldnt do a 1" at all but thats me...crank the damn T-bars more and install a 1" shackle be cheaper... but being i have already installed 1" body lift and god knows how many 3" body lifts now i think its a waste of time for 1"
actually IMO i wouldnt do a 1" at all but thats me...crank the damn T-bars more and install a 1" shackle be cheaper... but being i have already installed 1" body lift and god knows how many 3" body lifts now i think its a waste of time for 1"
Last edited by Redneckstone; 02-15-2009 at 10:48 PM.
#3
#6
#7
no stockers wont work if you read the 1" body lift sticky it explains everything about it..
you need longer bolts yes.. and yes you end up spending close to $100 for everything and your bumpers look moronic IMO...
when you could spend $160-200 for a 3" and it has everything OR crank the damn bars and shackle it... which will be about $40 cost for the shackle...
after installing one i will not do another again
#8
I spent a whopping $67 total for my 1" BL...add $3 for the diamond plate i put to fill the rear bumper/tailgate gap.
The stock rear cab bolts were used in the front cab bolts on mine. I've sold 1" BL bodybolt sets for $35 shipped. There's been 4 members who've purchased them. If interested, shoot me a PM. They are grade 10.9(aka metric grade of grade 8). The bolts in the PA and Summit kits are grade 8.8(aka metric grade of grade 5).
There was a thread about this exact issue....do some searching on it and i believe the person ended up calling PA and spent 1.99 ea for the 1x3" blocks.
The stock rear cab bolts were used in the front cab bolts on mine. I've sold 1" BL bodybolt sets for $35 shipped. There's been 4 members who've purchased them. If interested, shoot me a PM. They are grade 10.9(aka metric grade of grade 8). The bolts in the PA and Summit kits are grade 8.8(aka metric grade of grade 5).
There was a thread about this exact issue....do some searching on it and i believe the person ended up calling PA and spent 1.99 ea for the 1x3" blocks.
#10
Thread
Thread Starter
Forum
Replies
Last Post
blue_oval
1" & 3" Body Lifts
29
01-24-2010 07:41 PM