OK so I'm in the middle of my body lift, the bed is finished, I'm in the middle of the cab now. I got the four cab bolts that are inside the vehicle off and the spacers are already in, however the front two cab bolts are not comprehending lol... the nut on top came off no problem but the bolt just spins freely within the bushing, I'm not sure what to do now lol, we cut the bolts towards the bottom of the rubber bushing but it still doesn't want to come off. Any advice is appreciated, thanks

 

Heat and clamp the bushing

 

Pull the bushing and bolt out, hammer the old bolt out, drill the hole bigger for the new bolt