1" & 3" Body Lifts General discussion of body lifts for the Ford Ranger.

Body lift collapse easy?

Thread Tools
 
Search this Thread
 
  #1  
Old 07-24-2005
(907)FAN-BOY's Avatar
Member
Thread Starter
Join Date: Jul 2005
Location: Anchorage,Alaska
Posts: 125
Likes: 0
Received 0 Likes on 0 Posts
Body lift collapse easy?

Hey guys, from looking around I've seen hints that body lifts could potentially be dangerous (well I dunno about dangerous but like sometimes it collapses or gets messed up).. Becaue I want to lift my ranger some but I want to know if it'll hold up ok. Thanks
 
  #2  
Old 07-24-2005
MrRngr94's Avatar
Member
Join Date: Dec 2004
Location: Tampa
Posts: 493
Likes: 0
Received 0 Likes on 0 Posts
I'm by far no pro when it comes to body lifts, but I would say you should be safe as long as you don't do more than a 3" lift, maybe 4" but that would be the max that I would feel comfortable with on a daily driver. That's just my $.02
 
  #3  
Old 07-24-2005
(907)FAN-BOY's Avatar
Member
Thread Starter
Join Date: Jul 2005
Location: Anchorage,Alaska
Posts: 125
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by MrRngr94
I'm by far no pro when it comes to body lifts, but I would say you should be safe as long as you don't do more than a 3" lift, maybe 4" but that would be the max that I would feel comfortable with on a daily driver. That's just my $.02
Yea sounds good, thanks. I just want a cheap little lift as I will be paying off my parents $2,000 and I can't afford expensive stuff right now (plus I dunno if I would shell out a grand for the same size lift in suspension even if i had it).
 
  #4  
Old 07-24-2005
Swoop1156's Avatar
Member
Join Date: May 2004
Location: Hanover, Maryland
Posts: 1,965
Likes: 0
Received 0 Likes on 0 Posts
I've heard of people using hockey pucks as a cheap alternative. THAT will give you problems. A well engineered, mass produced body lift from a reputable company should be just fine.
 
  #5  
Old 07-24-2005
Draimen's Avatar
Member
Join Date: Feb 2005
Location: Fort Morgan, CO
Posts: 402
Likes: 0
Received 0 Likes on 0 Posts
Just don't try to jump stuff with a body lift and you will be fine
 
  #6  
Old 07-24-2005
Red_Ak_Ranger's Avatar
RF Veteran
iTrader: (1)
Join Date: Oct 2004
Posts: 17,221
Likes: 0
Received 4 Likes on 4 Posts
No risk at all really. If you're paying for part of your truck you will have respect for it. They make a 3 inch body lift for our trucks that you can buy through JC Whitney.

Infact, if you're interested I could sell you mine. ITs been sitting on the floor for 2 months short of a year, never put on. I bought it, and my dad got pissy. If you're interested PM me a price, and if Alaska Marine Lines ships from Juneau to Anchorage, I could get it to you w/ cheap shipping, because my sis works there.

Aaron
 
  #7  
Old 07-24-2005
Ranger1's Avatar
Member
Join Date: Nov 2004
Location:
Posts: 3,115
Likes: 0
Received 2 Likes on 2 Posts
I talked to plenty of people that have had them for years with no problem
 
  #8  
Old 07-24-2005
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Likes: 0
Received 8 Likes on 8 Posts
just to double check you have a 4x4 right? I dontk now because you dont have a signature with your trucks stats.....
 
  #9  
Old 07-24-2005
Pinecone's Avatar
Member
Join Date: Jun 2004
Location: Fayetteville, NC
Posts: 1,966
Likes: 0
Received 0 Likes on 0 Posts
Hockey pucks are not a lift, cheap lazy alternative. They break cause pucks aren't meant to take that kind of abuse.

I have never seen a bodylift collapse, I beat the crap out of mine on my Ranger and I know Jey(034x4) abuses his too. As long as you know the limits of your truck and don't exceed that, you will be just fine.
 
  #10  
Old 07-24-2005
TippnOver's Avatar
Member
Join Date: Nov 2004
Location: Danville, VA
Posts: 2,664
Likes: 0
Received 0 Likes on 0 Posts
i want a body lift.....

yah, just go ahead....dont try to fly it and u'll be fine
 
  #11  
Old 07-24-2005
Gearhead61's Avatar
RF Veteran
Join Date: May 2005
Location: College Station, TX
Posts: 5,782
Likes: 0
Received 2 Likes on 2 Posts
Gil managed to slide the drivers side of his cab an inch or so forward by hitting a mud puddle too fast with his body lift, but that's an isolated incident. Do a good job installing it and be smart about it and you ought to be just fine.
 
  #12  
Old 07-24-2005
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Likes: 0
Received 8 Likes on 8 Posts
I dont know i just dont trust a body lift....never have...
 
  #13  
Old 07-24-2005
Pinecone's Avatar
Member
Join Date: Jun 2004
Location: Fayetteville, NC
Posts: 1,966
Likes: 0
Received 0 Likes on 0 Posts
Well thats your choice, don't know why, but your choice.
 
  #14  
Old 07-24-2005
ryanrebel125's Avatar
Member
Join Date: May 2005
Location: crystal river,fl
Posts: 1,778
Likes: 0
Received 0 Likes on 0 Posts
i have a body lift. i beat the crap out of my truck.mines never let me down.i trust it.
 
  #15  
Old 07-24-2005
Jack Sparrow's Avatar
Member
Join Date: Nov 2004
Location: FL
Posts: 234
Likes: 0
Received 0 Likes on 0 Posts
yeah those blocks are rated at 50,000 PSI they wont break unless you want to break your whole truck ...i love the bodylift i had on my S-10
 
  #16  
Old 07-24-2005
Red_Ak_Ranger's Avatar
RF Veteran
iTrader: (1)
Join Date: Oct 2004
Posts: 17,221
Likes: 0
Received 4 Likes on 4 Posts
Originally Posted by Redneckstone
I dont know i just dont trust a body lift....never have...

The wierd part is you don't have a body lift...so I don't think there's much experience to speak from, since as far as I can tell, nobody has EVER had a very dangerous problem with body lifts.

Aaron
 
  #17  
Old 07-24-2005
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Likes: 0
Received 8 Likes on 8 Posts
Originally Posted by Red_Ak_Ranger
The wierd part is you don't have a body lift...so I don't think there's much experience to speak from, since as far as I can tell, nobody has EVER had a very dangerous problem with body lifts.

Aaron
no S*** i dont have one i have helped install them on a few friends trucks...I just wont ever own one sorry I dont like the gap between the frame and the motor sinking down...i dont know i just cant stand them...IMO....thus IMO...
 
  #18  
Old 07-24-2005
Red_Ak_Ranger's Avatar
RF Veteran
iTrader: (1)
Join Date: Oct 2004
Posts: 17,221
Likes: 0
Received 4 Likes on 4 Posts
Well. it just seems out of place how you insult body lifts in every thread. I think you could have a much better approach.

Instead of "I dont know i just dont trust a body lift....never have.."

why don't you try

"If you're a 2WD I highly reccomend spindles because, although they are a little more costly, they are a true suspension lift and are much more solidly built."

I just don't see why you have such a bad opinion on body lifts, since in every single post you attack them. You even attack them in 4WD truck threads. If you'd chip in to buy half an RCD lift with me then It just might be worth getting, but most of us for now are happy with our only cheap option which happens to be a body lift. I agree though, showing the underframe isn't that good looking, but I don't mind about the engine dropping, makes room for a bigger oen. Oh and also, the engine doesn't drop, the body rises.

Aaron
 
  #19  
Old 07-24-2005
Pinecone's Avatar
Member
Join Date: Jun 2004
Location: Fayetteville, NC
Posts: 1,966
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Red_Ak_Ranger
Well. it just seems out of place how you insult body lifts in every thread. I think you could have a much better approach.

Instead of "I dont know i just dont trust a body lift....never have.."

why don't you try

"If you're a 2WD I highly reccomend spindles because, although they are a little more costly, they are a true suspension lift and are much more solidly built."

I just don't see why you have such a bad opinion on body lifts, since in every single post you attack them. You even attack them in 4WD truck threads. If you'd chip in to buy half an RCD lift with me then It just might be worth getting, but most of us for now are happy with our only cheap option which happens to be a body lift. I agree though, showing the underframe isn't that good looking, but I don't mind about the engine dropping, makes room for a bigger oen. Oh and also, the engine doesn't drop, the body rises.

Aaron

Well said Aaron, I agree wholeheartedly:)
 
  #20  
Old 07-24-2005
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Likes: 0
Received 8 Likes on 8 Posts
Originally Posted by Red_Ak_Ranger
"If you're a 2WD I highly reccomend spindles because, although they are a little more costly, they are a true suspension lift and are much more solidly built."
Originally Posted by Redneckstone
just to double check you have a 4x4 right? I dontk now because you dont have a signature with your trucks stats.....
thats why i asked if he was 2wd or 4x4 and havent heard anything back....

I just don't see why you have such a bad opinion on body lifts, since in every single post you attack them. You even attack them in 4WD truck threads. If you'd chip in to buy half an RCD lift with me then It just might be worth getting, but most of us for now are happy with our only cheap option which happens to be a body lift. I agree though, showing the underframe isn't that good looking, but I don't mind about the engine dropping, makes room for a bigger oen. Oh and also, the engine doesn't drop, the body rises.
i know the body rises its just how i sayed it damn pin me to a wall....

after i get my fx4 after march or so i will be putting a superlift on it I'd rather wait and keep saving then just pop into a body lift...once agian you keep taking it to heart its just IMO(in my opinion) I defined it for you because you dont seem to understand...


am not saying I hate your truck because it has a body lift on it no....it just not my style just like my KC bar people love it or hate it....same princible....i put my $.02 in and you are getting mad about it...he asked for people to talk about so....I am......
 
  #21  
Old 07-24-2005
Red_Ak_Ranger's Avatar
RF Veteran
iTrader: (1)
Join Date: Oct 2004
Posts: 17,221
Likes: 0
Received 4 Likes on 4 Posts
Nah I'm not tryin to pick on ya or anything, your truck is the background of my computer, which means it has to be pretty good.

I personally like your KC bar, but I will not go into every thread on whether someone should get one, and make unfounded claims of safety hazards. Its not that you're saying your opinion, its that it seems false.

The reason I brought 4x4 up is because you say the same thing in 4x4 threads, "save up for a suspension lift". Well suprise suprise, a lot of us cannot do that. I'm going to college in a month, I barely have enough money to have bought the body lift heh.

I'm not tryin to attack you or pin you to a wall, just please stop talking **** about body lifts in every thread. You have a right to your opinion, but I have a right to disagree. Just say they look ugly or show too much frame, but don't say something that doesn't show to be dangerous is dangerous.

*edit* you said you were getting the FX2? That is the one that is 1 or 2 inches higher than the rest of the ranger trucks right? Doesn't that incorporate spacers that are in essence a body lift?


Aaron
 
  #22  
Old 07-24-2005
zabeard's Avatar
who?
iTrader: (8)
Join Date: Nov 2004
Location: IN
Posts: 26,044
Likes: 0
Received 10 Likes on 10 Posts
i trust mine its til very solid. ive only had it 1000 miles tho
 
  #23  
Old 07-24-2005
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Likes: 0
Received 8 Likes on 8 Posts
Ok first lets get this striaght you and I ARE NOT fighting am not made at you, you arnt mad at me ok kodos just having a friendly argument haha.

Originally Posted by Red_Ak_Ranger
Nah I'm not tryin to pick on ya or anything, your truck is the background of my computer, which means it has to be pretty good.
first thanks that means alot

I personally like your KC bar, but I will not go into every thread on whether someone should get one, and make unfounded claims of safety hazards. Its not that you're saying your opinion, its that it seems false.
i dont make false claims....dear lord look at all of them i dont talk about safety all i have sayed is this:(read the whole thread i didnt talk about safety, nor in other one's)
I dont know i just dont trust a body lift....never have...
and its in my mind i think this and i wont change my mind on it. i know many people use them and are FINE its just in my mind i dont like them and thats all i am saying

The reason I brought 4x4 up is because you say the same thing in 4x4 threads, "save up for a suspension lift". Well suprise suprise, a lot of us cannot do that. I'm going to college in a month, I barely have enough money to have bought the body lift heh.
I am also in college right now. its called i dont have 2 penny's eather because am saving like a freaking mad man to buy a new truck right now so i can pay cash for it.

saving for a suspension lift can be as easy as every week have an envolope and put $10 in it and never take $ out of it. OR get one of those HUGE coke coin bank things and put all your loose change and odd and end dollars in it.

I'm not tryin to attack you or pin you to a wall, just please stop talking **** about body lifts in every thread. You have a right to your opinion, but I have a right to disagree. Just say they look ugly or show too much frame, but don't say something that doesn't show to be dangerous is dangerous.
I dont talk S*** about them I just dont like the how the frame yadayada...once agian i dont talk S***....talking S*** would be like: " hey Body lift you suck, and your mom is a *****!!!" or "hey guy with a body lift your truck f-ing blows chunks go to hell"....i dont do that...i just try to steer people away from them because i dont care for them...just having a internet conversation.

*edit* you said you were getting the FX2? That is the one that is 1 or 2 inches higher than the rest of the ranger trucks right? Doesn't that incorporate spacers that are in essence a body lift?
I sayed fx4...meaning level II fx4
after i get my fx4 after march or so i will be putting a superlift on it I'd rather wait and keep saving then just pop into a body lift
and no they dont have spacers....only thing you might mean is rear blocks on the rear end but your truck has that too and thats on the suspension...and the only reason there higher is because of the 31's over the stock like 28's you have. and once agian no a level II doesnt have a body lift what so ever...
 
  #24  
Old 07-24-2005
Gearhead61's Avatar
RF Veteran
Join Date: May 2005
Location: College Station, TX
Posts: 5,782
Likes: 0
Received 2 Likes on 2 Posts
Haha I think its kinda funny how Zach kinda keeps getting picked on for so boisterously denouncing body lifts. Personally, I don't care for a body lift as much as I do a suspension lift, hence why I have a superlift. Regardless, I don't look down on trucks or think they suck because they have a body lift. I think I fall into the exact same category as Zach in my stance on body lifts, but nobody ever gives me trouble about it!

If you want to do a body lift, there are plenty of reasons why you should get one over a suspension lift. I just don't think those reasons are as good as the reasons to get a suspension lift
 
  #25  
Old 07-25-2005
Ranger1's Avatar
Member
Join Date: Nov 2004
Location:
Posts: 3,115
Likes: 0
Received 2 Likes on 2 Posts
So anyway, there are plenty of people with them that have used them with no problems
 


Quick Reply: Body lift collapse easy?



All times are GMT -6. The time now is 04:42 PM.