how about the full body pics I'm tired of looking at your driverside rear well

 

Looking good tho...

 

i aint got nothin on the front yet.... the front is BL'ed only.... the spindles will be coming soon. Next pics I post will be the finished project

 

how long did it take to install the bl? and which one did u get?

 

it took me and Dad about 4 days. Keep in mind, this was only working about 2 hrs each evening though... it wasnt hard... i thought it was gonna suck, but it really wasnt THAT bad...

 

was the gas tank filler neck a ***** to do? that the only thing i can see being a prolem other than the radiator. are all the body bolts easy to access?

 

nah, gas filler neck wasn't bad... just hose clamps and the extension tube. took about 5 mins total.

body bolts aren't too bad. just gotta strip some of your interior out. then you just pry up the rubber plugs with a screwdriver and there they are to greet you.

the radiator isn't really that bad either. it was hard for me, cause my dumb butt took it completely out and it was a pain to get back in.

something else, the isnstructions say to go ahead and put in the steering extension BEFORE you lift the cab... i found this relatively impossible. so i just locked the wheel, unhooked it, lifted the cab, and THEN put in the extension..

the directions do mis print some stuff... but any amount of common sense will account for it...


it's easy.... if i can do it, anyone can!

 

More Pics.... These include my badly out of whack front end... This is Just the side that's complete.

http://pg.photos.yahoo.com/ph/kg4ljf...e2.jpg&.src=ph

http://pg.photos.yahoo.com/ph/kg4ljf...e2.jpg&.src=ph

http://pg.photos.yahoo.com/ph/kg4ljf...e2.jpg&.src=ph

Now here's some from the front.. Note my misaligned wheel... what do you guys think? will I need the kit.. or?

http://pg.photos.yahoo.com/ph/kg4ljf...e2.jpg&.src=ph

http://pg.photos.yahoo.com/ph/kg4ljf...e2.jpg&.src=ph

 

Do you have any full front/side shots outside? It looks pretty good.

 

None outside yet.... mainly because I cant pull it outside... Still working on driver side spindle.

Needed a new lower ball joint, so I had to get one today. I will replae it tonight, and hopefully finish up.. Pics tomorrow hopefully...

 

dude it isnt that bad. it will be fine
put it together and take it to an alignment shop, they will fix u up

 

looks good man, i just came back from the alignment shop about 3 minutes ago. i get to go to the exhaust shop tomorrow.