lobing problems at idle
#1
lobing problems at idle
so my truck has been lobing and i took it to a mechanic to check it for other things. he said it was the mass because they bypassed it and the problem stopped. so i changed the MASS out for a reconditioned one. same problem
idle from 700-1500/2000 slowly goes down.
the only code that comes up is for an EGR valve...thoughts?
idle from 700-1500/2000 slowly goes down.
the only code that comes up is for an EGR valve...thoughts?
#3
yes so the hose that runs from the top of the engine into the intake is the couplrite. i tested it by pulling it looks and plugging the intake hole with my thumb and put a rag over the tube and held it with my hand. the engine would idle fine. since i have an intake kit i am gunna have to custom make a air tight seal for the tube. i have heard of ppl just plugging both and not running a tube but idk if that will get me past smog...i hate cali law....
Thread
Thread Starter
Forum
Replies
Last Post
whiskeybreath
SOHC - 2.3L & 2.5L Lima Engines
1
11-27-2014 04:06 PM