I recently heard about a maf mod and a tps mod, has anyone heard of these mods for a 2.3? If so how do you do them and what benifets do you get from them?

 

Here is a link to the maf mod.
https://www.ranger-forums.com/forum2...hlight=maf+mod
Haven't heard of the tps mod before. Remember the search tool is your friend.

 

 

The TPS mod is probably from some 3.0 Rangers that have too much slack in the throttle cable and the butterfly doesn't completely open. I haven't heard of this other than with the 3.0.

 

Ive heard about the throttle cable mod for the 2.3 on RPS. maybe thats what the maf mod is? doubt it htough, thats to totaly diff things.

 

the maf mod is a heck of a risk that most have gotten away with clean, but it aint worth it to me do attempt it.

 

thanks fellas! might try it but not real sure, has anyone tried it and how has it worked for them? what about the tps mod? I've done the throttle cable mod and might I say it works great!

 

i'v done both and i'v got way better throttle response and alot smoother on the highwayc

 

The TPS mod is referring to "Throttle Position Sensor". I think you may mean the Throttle Cable Mod. This is a simple procedure of pulling the slack out of the throttle cable from in front of the throttle pedal, and attaching a few Zip ties to hold it in place with no slack. This gives you a TRUE Wide Open Throttle and MUCH better throttle response.

I've had mine modded for 5 years now....never broken a Zip tie, never needed to take up more slack. However one day I removed them to remind myself what it felt like without it, and I was nearly sick.

 

i'v also done the TPS mod........it's easy just need a volt meeter PM me if u want me to tell ya how to do it

 

Or maybe post it so you dont get 350 million pm's?

 

sorry double post dont know what happened

 

anybody have a pic of the throttle cable mod?

 

I have never heard of these things? wow

 

the TPS mod is what some of the mustang guy do to increese spark. you have to take off you throttle postion sensor and drill out the holes where it bolt in. "so you can rotate it .after that put it back on . there should be 2 wires that are running to the Tps you want to tap into thos wires with a volt meter and get as close to 92 as possiable go to far adn it'll run like **** so you have to be care fuil it's also a good idea to make where it was stock

 

Throttle Cable Mod