Replaced upper/lower manifold gakets. Now no spark!
#1
Replaced upper/lower manifold gakets. Now no spark!
Hey. I got a little bit of a problem. I replaced upper lower intake gaskets, as well as my spark plugs and coil pack. Im getting no spark what so ever from the plugs. Im lost and any insight what to test or replace next would be greatly appreciated. Checked all my wiring and everything is connected and I have no extra bolts. Fuel pressure is reading 50-65psi while cranking. Thanks!
#7
#8
#9
turns out it was that or well the cam shaft position connector. one of the prongs was bent and not making a connection. Thanks for all the responces and help. Keep on trucking! next is the rear main seal. anyone know where I can get the tool to press the seal in? Thanks
#15
#16
The battery was disconnected for a week while I was doing both the manifold gaskets and rebuilding my injectors yadda yadda. plus I cleared all codes with my scanner.
Thread
Thread Starter
Forum
Replies
Last Post
Paul Wells
4.0L OHV & SOHC V6 Tech
2
04-09-2015 09:46 AM
894banger
General Ford Ranger Discussion
4
05-11-2011 08:45 PM