3.0 lift questions
#1
#4
#6
Member
iTrader: (2)
Join Date: Jun 2005
Location: Ohio
Posts: 2,592
Likes: 0
Received 0 Likes
on
0 Posts
I have a 3.0 with 4.10's and I find it almost perfect. Still has enough power to get the wheels spinning off road and allows for decent mileage on the highway. If you do a lot of city driving, I might recommend 4.56. I wouldn't mind going to 4.56 sometime in the future just because it puts a lot less strain on different drivetrain components.
#7
#9
Did or didn't?? I was told and have read that for a coil sprung with 3 inches that 32 was the max you could go. But with a body lift or the fabtech 5.5 you can run a 33. All the pics of 2wds on 33s I've seen they have had more that 3 inches. Now an edge/sport with spindle works because they are already 2 inches taller from the start
#12
Who are your spindles from? And I'm assuming your shackles are the belted 6400, and why the coil spacer and 2inch block and not explored leaf or add a leaf, just curious? Do u have a 4x2?
#15
Stock 4x4s are only about 2 inches higher than a regular xlt with coils if I'm right.
You won't be able to fit 33s with just a spndle lift. What Andrew did though, was stack the spndles with coil spacers (essentially what is used in most leveling kits). I have 31s with a coil sprung, with a full fabtech 3" kit.I could probably fit 32s but it'd be close.
You won't be able to fit 33s with just a spndle lift. What Andrew did though, was stack the spndles with coil spacers (essentially what is used in most leveling kits). I have 31s with a coil sprung, with a full fabtech 3" kit.I could probably fit 32s but it'd be close.
#18
Member
iTrader: (7)
Join Date: Jun 2010
Location: Houston, Texas
Posts: 1,407
Likes: 0
Received 0 Likes
on
0 Posts
Stock 4x4s are only about 2 inches higher than a regular xlt with coils if I'm right.
You won't be able to fit 33s with just a spndle lift. What Andrew did though, was stack the spndles with coil spacers (essentially what is used in most leveling kits). I have 31s with a coil sprung, with a full fabtech 3" kit.I could probably fit 32s but it'd be close.
You won't be able to fit 33s with just a spndle lift. What Andrew did though, was stack the spndles with coil spacers (essentially what is used in most leveling kits). I have 31s with a coil sprung, with a full fabtech 3" kit.I could probably fit 32s but it'd be close.
#19
#22