88 ranger 2.9 wont run? Fuel issues
Hi Gang Im new here so here goes.I have a 1988 ranger 2.9 liter fuel injected 5 spd. Two days ago I was en route home and it started to stumble or stall at low RPMs.I made it home cut it off and it will not start back up.I have fuel to the rails there is no fuel in the vacuum line on the pressure control line.If I put fuel into the intake it will start but will only run until that fuel in the intake is gone.Fuel pressure is 40psi both pumps working and I am stumped!! Electronic??? HELP!!!