Coil Pack/IAT Sensor Questions
I'm getting ready to do a composite upper intake manifold swap next weekend. The coil bracket on my 99' won't work with the newer hardware. I do have a passenger side valve cover off an 02' Ranger to mount the coil pack to if necessary. However the 02'-up coil pack is a 3 screw, my 99' has 4.
Will the 02-up coil pack plug directly into my factory harness without any issues? If I relocate the coil pack I'll have to replace the spark plug wires as well.
The newer intake tube doesn't have a bung for the IAT sensor as well. I'm thinking about relocating it to the airbox, on the radiator side of the MAF. Will this cause any issues? I don't have any pinging issues currently on 87 octane. I eliminated the EGR in anticipation of these changes and still don't have any pinging issues.
Thanks for the information,
99' Ranger XLT 4x4 Ex. Cab. Lowered 2.5"/2" (Removed blocks & 08 Keys) 3.0FFV, 5spd, 3.73's, 245/70-16's on OE Teardrops. Clear corners, 06 Tail Lights, Tinted Windows, Explorer OHC, U/D Crank Pulley, E-Fan, 02 Composite upper, 05' Ranger half-shafted TB, EGR Delete, 06 Mirrors, Sound Deadened w/Raamat.