I need Detailed Engine Specs please..
#1
I need Detailed Engine Specs please..
I am trying to find detailed engine specs for the 2002 3.0L V-6..
Here is what I am looking for:
#1. Bore
#2. Stroke
#3. # of Valves / Cylinder
#4. Intake & Exhaust Valve Diameter
#5. Compression Ratio
#6. Airflow Cubic Feet per Min.
#7. Intake & Exhaust lift @ Valve
#8. Lifter Type
#9. Lifter Acceleration Rate
#10. Primary Timing (Seat to Seat) IVO / IVC EVO / EVC
If anyone has this information I would greatly appreciate it.. I'm trying to use the Motion Software Dyno Sim program; to try a few mods out without the expense of going to a dyno shop... I am really good at tuning things in the program but you have to have the engine specs before you can tune things accurately.
Here is what I am looking for:
#1. Bore
#2. Stroke
#3. # of Valves / Cylinder
#4. Intake & Exhaust Valve Diameter
#5. Compression Ratio
#6. Airflow Cubic Feet per Min.
#7. Intake & Exhaust lift @ Valve
#8. Lifter Type
#9. Lifter Acceleration Rate
#10. Primary Timing (Seat to Seat) IVO / IVC EVO / EVC
If anyone has this information I would greatly appreciate it.. I'm trying to use the Motion Software Dyno Sim program; to try a few mods out without the expense of going to a dyno shop... I am really good at tuning things in the program but you have to have the engine specs before you can tune things accurately.
#2
heres the url to the ranger station has alot on the 3.0l engine
http://www.therangerstation.com/tech...rformance.html
this one should have the rest of the info
http://www.therangerstation.com/tech_library/index.htm
http://www.therangerstation.com/tech...rformance.html
this one should have the rest of the info
http://www.therangerstation.com/tech_library/index.htm
#3
http://www.rogueperformance.com if it's still in place has lots of stuff on the 3.0.
Much of what you need is in this .pdf file: http://www.rogueperformance.com/3.0engine.pdf
It requires a no-brainer password to open: rogue
Much of what you need is in this .pdf file: http://www.rogueperformance.com/3.0engine.pdf
It requires a no-brainer password to open: rogue
#4
Thread
Thread Starter
Forum
Replies
Last Post
Prerunner-Ranger
General Technical & Electrical
7
07-21-2010 04:32 PM