oil leak at injectors
#1
oil leak at injectors
Hi All, i had a cam belt failure, caused damage to values etc, so had head done at engineering shop.
Also refurbished injector pump, fitted 4 injectors(tested and verified ok), replaced copper washers at bottom of injectors and the injector seals.
On start up noticed small oil leak at base of back injector(closest to cab).
We removed the injectors and re-seated the seals, then refitted injectors.
On start up everything ok till we revved, then oil spewing out at base of all four injectors.
Need help please- what can be wrong?
regards
jcr
Also refurbished injector pump, fitted 4 injectors(tested and verified ok), replaced copper washers at bottom of injectors and the injector seals.
On start up noticed small oil leak at base of back injector(closest to cab).
We removed the injectors and re-seated the seals, then refitted injectors.
On start up everything ok till we revved, then oil spewing out at base of all four injectors.
Need help please- what can be wrong?
regards
jcr
Last edited by jcr; 02-11-2017 at 08:38 AM.
#2
RF Veteran
iTrader: (1)
Welcome to the forum
You are located in South Africa, so your Ranger is not the same as ours, we call your Model a T6 International Ranger and they are not available here
Yours is larger and uses different engines that we have here in North America
So we won't be of much help
Try this South African forum: 4x4 Community Forum
You also will need to include
Year of vehicle
Make, Ford Ranger?
Engine size
Diesel or gasoline
And sometimes 2WD or 4x4 matters
You are located in South Africa, so your Ranger is not the same as ours, we call your Model a T6 International Ranger and they are not available here
Yours is larger and uses different engines that we have here in North America
So we won't be of much help
Try this South African forum: 4x4 Community Forum
You also will need to include
Year of vehicle
Make, Ford Ranger?
Engine size
Diesel or gasoline
And sometimes 2WD or 4x4 matters
Last edited by RonD; 02-10-2017 at 09:38 AM.
Thread
Thread Starter
Forum
Replies
Last Post
SonicRanger001
Drivetrain Tech
6
12-22-2005 01:04 PM