2.9L & 3.0L V6 Tech General discussion of 2.9L and 3.0L V6 Ford Ranger engines.

Need Help With Squeek From A Pulley

Thread Tools
 
Search this Thread
 
  #1  
Old 09-17-2005
9XLT8's Avatar
Member
Thread Starter
Join Date: May 2005
Location: Harrisonburg, Va
Posts: 167
Likes: 0
Received 0 Likes on 0 Posts
Need Help With Squeek From A Pulley

Well my belt started squeeking, so after a few days i poped the hood and looked at it, the ribes are starting to crack but not enough for it to sqeek this loud(at least not to me), so i looked around for a bit and it sounded like this squeek was comming from the idler pulley, i sprayed a lil ZEP 45(penatrating lub with teflon) and presto it stopped, well if you let it set for a lil it will start to squeek for a lil but if you spray it with some ZEP it will stop, so i bought me a new Idler Pulley and replaced it, well it still squeeks, only when you get above 2,000rpm or so, spray it with a lil ZEP and it stopes, i have no clue what it is, i would go ahead and replace the belt, but it stops squeeking if i spray the idler pulley, even the new one any help would be greatly apperacated

thanks,
cody
 
  #2  
Old 09-17-2005
5.0SVT3.0XLT's Avatar
Member
Join Date: May 2005
Location: Ohio
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
mine squeeks also... on cold mornings and rainy days especially. Its very annoying, and wont go away. My belt is perfect too, and the idler is as tight as it can get. I would like to hear what anyone else did to get rid of this.
 
  #3  
Old 09-18-2005
04lvl2's Avatar
RF Veteran
Join Date: Jun 2004
Location: Palm Bay, FL
Posts: 5,600
Likes: 0
Received 0 Likes on 0 Posts
Could be some buildup in the grooves of the pulleys or the tensioner, when you are spraying the idler the belt is getting some of the lube as well. Afer of a few minutes of running the lube wears off and the squeak returns. If the belt is cracked then I would replace it, clean the grooves out with a steel bristled brush and go at it again.
 
  #4  
Old 09-18-2005
Join Date: Jun 2004
Location: PUEBLO, CO
Posts: 3,753
Likes: 0
Received 0 Likes on 0 Posts
maybe one of the pulleys? mine sqeals at about 3700 rpm until about 4500 rpm and sometimes all the way through the rpms. I pooped the hood and one of my pulleys is a bit wobbly and its weird cause it was painted black from the factory, but the paints worn out in some spots but not others...
 
  #5  
Old 09-18-2005
04lvl2's Avatar
RF Veteran
Join Date: Jun 2004
Location: Palm Bay, FL
Posts: 5,600
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by SUPERGILDO
maybe one of the pulleys? mine sqeals at about 3700 rpm until about 4500 rpm and sometimes all the way through the rpms. I pooped the hood and one of my pulleys is a bit wobbly and its weird cause it was painted black from the factory, but the paints worn out in some spots but not others...
Sorry Gil but you POOPED the hood, had to do it man lol.
 
  #6  
Old 09-18-2005
Join Date: Jun 2004
Location: PUEBLO, CO
Posts: 3,753
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 04lvl2
Sorry Gil but you POOPED the hood, had to do it man lol.

hey when you gotta go, you gotta go...
 
  #7  
Old 09-18-2005
Join Date: May 2004
Location: Fuquay Varina, NC
Posts: 3,048
Likes: 0
Received 0 Likes on 0 Posts
if the belt is cracking, replace it. period.
 
  #8  
Old 09-18-2005
9XLT8's Avatar
Member
Thread Starter
Join Date: May 2005
Location: Harrisonburg, Va
Posts: 167
Likes: 0
Received 0 Likes on 0 Posts
i will replace the belt and hopefully that will help thanks for all the help
 
  #9  
Old 09-18-2005
graniteguy's Avatar
Member
iTrader: (3)
Join Date: Jul 2005
Location: Texas
Posts: 3,221
Likes: 0
Received 1 Like on 1 Post
Replace it with a gatorback. Autozone sells that brand. It cured my poblem as well as many others.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Goodysgotacuda
OLD - Engine & Drivetrain
6
05-17-2009 12:58 AM
03dangrang
2.9L & 3.0L V6 Tech
10
11-06-2008 06:12 PM
therangerofdanger
2.9L & 3.0L V6 Tech
4
04-11-2008 05:00 AM
a311fanam
General Ford Ranger Discussion
10
07-14-2005 04:18 PM
Bailey
General Ford Ranger Discussion
13
10-28-2004 12:29 PM



Quick Reply: Need Help With Squeek From A Pulley



All times are GMT -6. The time now is 03:03 PM.