Post your exhaust system!
#26
On my truck I had a Flowmaster 40 series single in and dual out with 2.75in pipe. I have two stainless steel tips which are 3 by 18 and on a 45* angle. The flowmaster was keeping it to quiet so I cut it off and built a Y pipe. Then a little later I drilled out the cat and now it sounds great.
Take a look for your self: http://www.cardomain.com/ride/1941057/3
Take a look for your self: http://www.cardomain.com/ride/1941057/3
#27
Member
iTrader: (1)
Join Date: Jun 2004
Location: LA, CA
Posts: 2,575
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fordboyfx4
On my truck I had a Flowmaster 40 series single in and dual out with 2.75in pipe. I have two stainless steel tips which are 3 by 18 and on a 45* angle. The flowmaster was keeping it to quiet so I cut it off and built a Y pipe. Then a little later I drilled out the cat and now it sounds great.
Take a look for your self: http://www.cardomain.com/ride/1941057/3
Take a look for your self: http://www.cardomain.com/ride/1941057/3
#30
Originally Posted by fordboyfx4
On my truck I had a Flowmaster 40 series single in and dual out with 2.75in pipe. I have two stainless steel tips which are 3 by 18 and on a 45* angle. The flowmaster was keeping it to quiet so I cut it off and built a Y pipe. Then a little later I drilled out the cat and now it sounds great.
Take a look for your self: http://www.cardomain.com/ride/1941057/3
Take a look for your self: http://www.cardomain.com/ride/1941057/3
#32
#34
hmm lets see
ive had/have..
1. Custom Magnaflow SI/DO 2.5/2.25 45s out the back $450
2. Custom Flowmaster 40 series SI/DO 2.5/2.25 45s out the back. $200
3. Custom Flowmaster 40 series SI/DO 2.5/2.25 tips cut off $free
4. Custom Borla XL SI/SO 2.25 dumped before the bumper $150
hands down the best one ive had is the borla, i like the magnaflow performance, and wish i could have had the tips from the flowmaster on the magnaflow setup. flowmaster was ok, sounded good but performance sucked.
there might also be another setup in the works, borla muffler with dual 3.5" tips strait out the back, i already have the tips, just havnt had it done yet or i cant decide.
number above corresponds to the number above/with the picture.
1.
2.
3.
4.
ive had/have..
1. Custom Magnaflow SI/DO 2.5/2.25 45s out the back $450
2. Custom Flowmaster 40 series SI/DO 2.5/2.25 45s out the back. $200
3. Custom Flowmaster 40 series SI/DO 2.5/2.25 tips cut off $free
4. Custom Borla XL SI/SO 2.25 dumped before the bumper $150
hands down the best one ive had is the borla, i like the magnaflow performance, and wish i could have had the tips from the flowmaster on the magnaflow setup. flowmaster was ok, sounded good but performance sucked.
there might also be another setup in the works, borla muffler with dual 3.5" tips strait out the back, i already have the tips, just havnt had it done yet or i cant decide.
number above corresponds to the number above/with the picture.
1.
2.
3.
4.
#36
#37
Since CT is way too strict with emmissions laws but really don't care about noise....
Everything from the Flange back to the Cats and motor are stock..
Everything from the the flange forward is gone!!
I just cut the muffler got some extra hangers and straight piped it out to the back with a square tip.. Looks pretty cool and sounds bad a$$ when you get on it..
Thinking about the GIBSON dual exhaust kit that summit racing has for the 3.0 v6.. a complete dual exhaust Bolt-On for $275 shipped is a good deal..
Everything from the Flange back to the Cats and motor are stock..
Everything from the the flange forward is gone!!
I just cut the muffler got some extra hangers and straight piped it out to the back with a square tip.. Looks pretty cool and sounds bad a$$ when you get on it..
Thinking about the GIBSON dual exhaust kit that summit racing has for the 3.0 v6.. a complete dual exhaust Bolt-On for $275 shipped is a good deal..
#38
Flowmaster 40. Single in dual out 2.25 with tips. I might change it to something else, like dumping it after the axle...dunno yet.
Hey Kkboyd- If you take off your bumpers plastic covering and paint it black like I did, it REALLY makes a difference! Im planning on doing my front valance next
#41
Originally Posted by hougy
Hey Kkboyd- If you take off your bumpers plastic covering and paint it black like I did, it REALLY makes a difference! Im planning on doing my front valance next
#44
Originally Posted by kboyd62
I have one of the Magnaflows if anyone is interested. Not really sure where it can be hosted. Lemme know.
wertzy@gmail.com
#46
I had a magnaflow dual with 3inch Tips sounclips are floating around here somewhere
Soundclip is here Click Here
Soundclip is here Click Here