EGR troubles...
#1
EGR troubles...
My 3.0 was diagnosed with "bad EGR flow". I took the EGR off and cleaned it (wasn't that dirty/not to much carbon build up) and it seemed to work when bench tested the old fashon way, by sucking on it.
My next guess is the control solinoid. I"m hoping the EGR port into the manifold isn't clogged.
Does anyone have any insight on this problem? I'd appreciate any help/hints. Thanks.
My next guess is the control solinoid. I"m hoping the EGR port into the manifold isn't clogged.
Does anyone have any insight on this problem? I'd appreciate any help/hints. Thanks.
#6
What is the dpfe sensor? I took the EGR out and cleaned it and it seems to be working. I replaced the egr control solinoid and it seemed to help...slightly. I'm thinking there may be more than one problem with the system. I guess I should just replace the EGR even though it seems to work. Maybe the plunger isn't seating right and not making a good vacuum seal.
Thread
Thread Starter
Forum
Replies
Last Post
skillzo1
OLD - Engine & Drivetrain
5
01-17-2012 01:27 PM