Need some swap info help.
#1
06-14-2015
Join Date: Nov 2013
Location: Labette, Ks
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Need some swap info help.
Okay I bought a 00 4.0 ohv 2wd no egr and I'm going to be swapping the engine only it into my 99 4.0 ohv 4x4 no egr. Will I have need to change computer? Will I have to deal with PATS or anything like that. Exactly same motors just wondering if one year difference cause any electricial issues. Thanks!
#2
06-15-2015
No computer change needed.
May need to swap CPS(cam position sensor) from '99 to '00 unless both are 2-wire.
They changed the 3-wire CPS to a 2-wire in the late '90's.
Change rear main seal on '00 before installing.
Check all the core plugs(freeze plugs) on the '00 while it is out, replace any that have any signs of rust.
If '99 is an automatic and this is your first time, you can ruin the trans if you don't have torque converter in the correct position when you bolt trans to block.
May need to swap CPS(cam position sensor) from '99 to '00 unless both are 2-wire.
They changed the 3-wire CPS to a 2-wire in the late '90's.
Change rear main seal on '00 before installing.
Check all the core plugs(freeze plugs) on the '00 while it is out, replace any that have any signs of rust.
If '99 is an automatic and this is your first time, you can ruin the trans if you don't have torque converter in the correct position when you bolt trans to block.
Last edited by RonD; 06-16-2015 at 08:51 AM.
#3
06-16-2015
Join Date: Nov 2013
Location: Labette, Ks
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
fishaton2
General Ford Ranger Discussion
13
09-14-2019 04:25 PM
