4.0L OHV & SOHC V6 Tech General discussion of 4.0L OHV and SOHC V6 Ford Ranger engines.

Idles fine , but cuts out while engine is reved

Thread Tools
 
Search this Thread
 
  #1  
Old 04-24-2014
bigbird123's Avatar
Member
Thread Starter
Join Date: Apr 2014
Location: Plainview , Arkansas
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Idles fine , but cuts out while engine is reved

I have the 2001 ford ranger edge 4.0 L v6
When you first start engine , it cranks right up , idles fine , but when you rev the engine , at about 2000rpm the engine starts cutting out , like it is starving for air or gas , it just starts sputtering , you let off pedal and it goes back to a calm idle .. Please Help , where do I start , I am disabled and on a fixed income , Thanks
 
  #2  
Old 04-24-2014
RonD's Avatar
RF Veteran
iTrader: (1)
Join Date: Jan 2014
Location: Vancouver, BC
Posts: 30,654
Received 2,820 Likes on 2,586 Posts
$10 fuel filter would be where I would start, at 13 years old it would be just good maintenance even if it is not the problem

I assume when you drive it, it also starts lacking power when you get to 2,000 rpm?

Fuel pressure gauge would be helpful, there is a fitting on the engines fuel rail that looks like a tires air valve(schrader valve), gauge screws onto that.

Your '01 should have 65psi while idling, when at 2,000 rpm it shouldn't drop lower than 55psi.


Also a simple thing but have seen it happen, loosen the gas cap, so air can get in.
A misfunctioning gas cap or EVAP system can cause an air lock in the gas tank so pump can not maintain good flow out of the tank.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
pitbull419
4.0L OHV & SOHC V6 Tech
1
03-09-2014 10:43 PM
kennyflhr
SOHC - 2.3L & 2.5L Lima Engines
2
09-26-2013 07:05 AM
MarkyMayhem
General Technical & Electrical
0
06-24-2013 10:59 AM
atmu5fear
General Technical & Electrical
3
11-28-2011 09:11 PM
scamry
General Technical & Electrical
4
10-31-2011 07:34 AM



Quick Reply: Idles fine , but cuts out while engine is reved



All times are GMT -6. The time now is 12:11 AM.