4.0L OHV & SOHC V6 Tech General discussion of 4.0L OHV and SOHC V6 Ford Ranger engines.

Block heater and freeze plug

Thread Tools
 
Search this Thread
 
  #1  
Old 01-18-2005
FireRanger's Avatar
Thread Starter
Join Date: May 2004
Location: CT
Posts: 0
Likes: 0
Received 3 Likes on 3 Posts
Block heater and freeze plug

Does the 4.0 have a freeze plug in the engine block that is easy to access? One of my buddies said they are often behind the exhaust manifold but wasn't sure about out trucks.

This leads me to my next question. I want to get a block heater that goes in that freeze plug so my engine will be nice and toasty when I go to crash at 2am or I forget to warm the truck up before I leave for work. Anyone know where I can get one that will work on our trucks? JC Whitney doesn't have them.
(2003 4.0 Auto)

Matt
 
  #2  
Old 01-18-2005
V8 Level II's Avatar
RF Veteran
iTrader: (4)
Join Date: Nov 2004
Location: Michigan
Posts: 7,910
Likes: 0
Received 23 Likes on 20 Posts
Ford sells a block heater/battery blanket kit. Every Ford kit I have seen installs in place of a freeze plug.
http://www.fordaccessoriesstore.com/...939&detail=yes
 
  #3  
Old 01-18-2005
Join Date: Jun 2004
Location: outside Detroit, where it's safer
Posts: 874
Likes: 0
Received 1 Like on 1 Post
It will obviously be warmer than it would have been without the block heater, but it isn't going to get you to operating temperature, or even close really. It isn't designed for that.
 
  #4  
Old 01-18-2005
FireRanger's Avatar
Thread Starter
Join Date: May 2004
Location: CT
Posts: 0
Likes: 0
Received 3 Likes on 3 Posts
I know. But it would be nice to have it at a temp that isn't 0.3. Very often, I do not have time to let it warm up at all. And for that matter, running from a warm bed to a frozen truck at 3am is not fun.
 
  #5  
Old 01-19-2005
Join Date: May 2004
Location: Fuquay Varina, NC
Posts: 3,048
Likes: 0
Received 0 Likes on 0 Posts
i was going to order a setup for my F150, but my friend from north dakota said they just went to NAPA and got a universal one for like half the price. i havent gotten around to doing it though, so i couldnt tell you first hand
 
  #6  
Old 01-19-2005
FireRanger's Avatar
Thread Starter
Join Date: May 2004
Location: CT
Posts: 0
Likes: 0
Received 3 Likes on 3 Posts
Anyone know WHERE the freeze plug is located on the 4.0? Just want to gauge how much of a pain it is going to be.
 
  #7  
Old 01-19-2005
Join Date: Jun 2004
Location: outside Detroit, where it's safer
Posts: 874
Likes: 0
Received 1 Like on 1 Post
I have a heated garage so I often forget what it is like for people that park outside. My vehicles are always 40 degrees even on the coldest nights.

When you get one, just put it on a timer so it turns on a few hours before you leave in the morning.
 
  #8  
Old 01-19-2005
karrbass4life's Avatar
Member
Join Date: Nov 2004
Location: Cincinnati, Ohio
Posts: 3,072
Likes: 0
Received 2 Likes on 2 Posts
NOW i know what that plug on the front of our Explorer is for!!! :D I could benefit fromt that warmer (If only i didn't have to park on the street) , but does a battery really need to be warm. I replaced the dumb stock battery with an Optima Red Top.
 
  #9  
Old 01-19-2005
FireRanger's Avatar
Thread Starter
Join Date: May 2004
Location: CT
Posts: 0
Likes: 0
Received 3 Likes on 3 Posts
A warm battery is a happy, non-dead battery :) Still wondering where the freeze plug is.
 
  #10  
Old 01-19-2005
Join Date: Jun 2004
Location: outside Detroit, where it's safer
Posts: 874
Likes: 0
Received 1 Like on 1 Post
It depends on how cold it is and how charged the battery is. The lower the charge the less acidic the fluid is, the less acidic it is the higher the temperature it freezes at. And when it freezes it's game over, it cracks and the fluid drains out.
 
  #11  
Old 01-19-2005
Join Date: Jun 2004
Location: Somewhere, XYZ
Posts: 4,351
Likes: 0
Received 0 Likes on 0 Posts
The colder the battery the lower it's cranking potential is. That's true of any battery, Optima Red Top or 'dumb' stock battery alike.. Now a premium battery may retain it's power better than a stock battery, but it still isn't immune from the effect.

Those in very very cold environments will have problems getting their engines to turn over unless the engine AND battery are kept warm. I've lived in New England, a relatively cold environment (we've started days low in the single digits all this week!) all my life and we've never had a problem.

To the best of my knowledge, the heater blanket won't really help the engine warm up any faster, will it? It will help it start when it might not anyway, but it won't help the engine warm up that much faster and prevent wear or get the heating system going any faster.

Fireranger, it sounds to me that what you need is a remote start..
 
  #12  
Old 01-19-2005
V8 Level II's Avatar
RF Veteran
iTrader: (4)
Join Date: Nov 2004
Location: Michigan
Posts: 7,910
Likes: 0
Received 23 Likes on 20 Posts
Originally Posted by FireRanger
Anyone know WHERE the freeze plug is located on the 4.0? Just want to gauge how much of a pain it is going to be.
In the shop manual, there aren't many pictures that show the freeze plugs but it looks like there are two on each side of the block. Yes, they are behind the exhaust manifolds but it looks like there is probably enough room to maneuver. Of course, you must drain the coolant system before starting and you will need the means to remove the freeze plug. This installation would have to be a lot easier working from below so a hoist would be a big help.
 
  #13  
Old 01-19-2005
TippnOver's Avatar
Member
Join Date: Nov 2004
Location: Danville, VA
Posts: 2,664
Likes: 0
Received 0 Likes on 0 Posts
yes, remote starts are very pimp.....just wake up in the morning, reach out a door/window, turn the sucker on, and rememever the night b4 to turn the heater all the way up b4 u turn the truck off.....then go eat breakfast, get ready, and by the time u're done, the truck should be at the desired temp.
 
  #14  
Old 01-19-2005
FireRanger's Avatar
Thread Starter
Join Date: May 2004
Location: CT
Posts: 0
Likes: 0
Received 3 Likes on 3 Posts
I have a remote starter already. It is also connected to my two-way radio, so my fire tones and commands from the console at work can remote start it. But none of this does any good when it is 1.2 degrees and I have to run out to the truck at 3am because someone wrapped their car around a tree (or I oversleep and don't have time to wait in the morning to go to work).
 
  #15  
Old 01-19-2005
V8 Level II's Avatar
RF Veteran
iTrader: (4)
Join Date: Nov 2004
Location: Michigan
Posts: 7,910
Likes: 0
Received 23 Likes on 20 Posts
Originally Posted by NHBubba
Those in very very cold environments will have problems getting their engines to turn over unless the engine AND battery are kept warm. I've lived in New England, a relatively cold environment (we've started days low in the single digits all this week!) all my life and we've never had a problem.

To the best of my knowledge, the heater blanket won't really help the engine warm up any faster, will it? It will help it start when it might not anyway, but it won't help the engine warm up that much faster and prevent wear or get the heating system going any faster.
I agree, Colin.

In extreme cold, the battery warmer may be even more important than the block heater. I was in Yellowknife, NWT, Canada, working on an Econoline. When the temp got below about -35F, the block heater was useless because the available battery power was so low - no start. With both the blanket and the block heater, it started quite well. Using only the blanket, I was able to start the engine at temperatures as low as -50F (actual temp, not an artificial index like wind chill). The engine was not too happy about it but it started and stayed running.

So, in extreme conditions, the battery blanket is the single most important item for successful cold starting but the block heater will save you a lot of engine and starter wear. The Ford kit comes with both.
 

Last edited by V8 Level II; 01-19-2005 at 11:37 AM.
  #16  
Old 10-13-2019
talkeetnaneil's Avatar
Member
Join Date: Oct 2019
Location: Talkeetna, Alaska
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
I have a factory installed block heater. It is in the side of the engine, towards the front, passenger side. A must have in Alaska.
 
  #17  
Old 10-26-2019
Georgeandkira's Avatar
Member
Join Date: Sep 2019
Location: Hackensack, Nj
Posts: 757
Received 130 Likes on 118 Posts
Just a Q on the battery warmer:
How thick is it? There's a 4-sided, plain insulator on my G-59 battery which COMPLETELY FILLS the space available.

Does the warmer mate with a smaller group size battery?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
d0sitmatr
General Technical & Electrical
2
07-01-2017 08:45 PM
doug Rooney
2.9L & 3.0L V6 Tech
0
12-07-2013 07:52 AM
Ray_Welder
4.0L OHV & SOHC V6 Tech
2
12-08-2010 10:48 AM
caroj59
SOHC - 2.3L & 2.5L Lima Engines
0
10-29-2010 08:43 PM
scoutsize
4.0L OHV & SOHC V6 Tech
5
07-10-2009 01:57 PM



Quick Reply: Block heater and freeze plug



All times are GMT -6. The time now is 08:40 AM.