Sub Box
#1
Sub Box
I dont really know what to do... i want to get two . . . http://www.crutchfield.com/App/Produ...3&tp=111&avf=N to put in the back of my single cab... i was wondering how to build a box... or should i just buy one
#2
That's going to be a tight fit, my friend. :) If you want to go with dual tens, they may have a single box for both or separate boxes for each corner. Then you can mount the amp in the middle. Building a box is not that hard if you have the right tools. (Table saw beats Jigsaw anyday...) Also, you have to plan it out a little to get it to match the sub.
(My $0.02) One good ten should be all you need in a single cab. (My 10" solobaric ROCKED my entire cherokee and was almost overkill....) If I had another single cab, I'd buy a good solid ten for the rear, then save the rest of the money for a good set of separates for the front and a solid 4ch amp to push it all. Simplicity in design.
Good luck with what ever you decide to do and keep us posted.
-Chance
(My $0.02) One good ten should be all you need in a single cab. (My 10" solobaric ROCKED my entire cherokee and was almost overkill....) If I had another single cab, I'd buy a good solid ten for the rear, then save the rest of the money for a good set of separates for the front and a solid 4ch amp to push it all. Simplicity in design.
Good luck with what ever you decide to do and keep us posted.
-Chance
#3
#4
#5
Thread
Thread Starter
Forum
Replies
Last Post
pushdeck
OLD - Interior, Exterior, Electrical, & Misc.
1
05-02-2010 10:39 AM