HELP Tremor problem
#1
HELP Tremor problem
Ok so you know I got a 2004 tremor head unit. It came in today and I installed it.
Turned it on put a cd in and it looked like it started to play said it was on the screen but no audio came out. Everything seemed to be working but no audio.
It has the two plugs and a tab for what I think is a ground. I'm not using the amp plug just the stock one.
Do I need to hook up a ground to the tab or what do you think the problem is. The stock cd player works I even checked it after and still worked.
Turned it on put a cd in and it looked like it started to play said it was on the screen but no audio came out. Everything seemed to be working but no audio.
It has the two plugs and a tab for what I think is a ground. I'm not using the amp plug just the stock one.
Do I need to hook up a ground to the tab or what do you think the problem is. The stock cd player works I even checked it after and still worked.
#12
Why do you need the amp other people on this site have the 2003 tremor head unit without the amp and it works fine. I did notice that when i turn the volume up almost all the way a little bit starts to come out and about the same cranked all the way. The guy i bought it from said i dont need to run am apm. He bench tested it with no amp and it worked fine. He is going to fix it.
#13
The wiring harness for the Tremor's is different. Installing aftermarket head in my tremor was a nightmare because no one makes the harness. I also don't believe you can take a Tremor head and slap it in any ol Ranger and expect it to play. The tremor head outputs line level audio to amps (similar to RCA) not to speakers.
#14
He should be able to use any amp he will just have to make his own wiring. When I installed my F900BT I had to create some custom wiring. I have a tremor wiring diagram I will find and post. But the wires running to the amps are basically RCA. When I first installed my stereo with harness it was outputing amplified audio from the head to the amplifiers thus making it really crappy sounding and really loud. Modifying the wires that run to the factory amps with RCA plugs on the end and plugging them into the RCA out on my head worked perfectly with excellent sound quality. Concept should work the same in this guys situation just the other way around.
Thread
Thread Starter
Forum
Replies
Last Post
04_Tremor
General Ford Ranger Discussion
3
10-27-2009 12:10 AM
redrangerXLT
Audio & Video Tech
3
02-15-2008 06:30 AM
edgeofthecliff
General Ford Ranger Discussion
9
07-29-2004 08:19 PM