Just picked up a Pioneer GM-D7400M on the weekend and have yet to pick up a sub.
Here's a pic. http://www.productwiki.com/upload/im..._gm_d7400m.jpg
I'm wanting to go with a sealed box, something that hits tight and as accurate as possible. I listen to metal, and lots of '90's grunge.
Some specs on the amp are as follows:
Mono bass amplifier w/ maximum output power of 1 x 400W (4Ω) or 1 x 800W (2Ω).
RMS power is 1 x 200W (20Hz - 240Hz/4Ω) or 1 x 400W (50Hz / 2Ω) with a frequency response of 10 - 240 Hz.
The unit has less than 0.3% distortion and signal-to-noise ratio of more than 80 dB. It has a bass boost frequency of 50Hz (0/6/12 dB) with a low pass frequency of 40 - 240 Hz (-12 dB/oct).
Those stats are from the web and mean very little to me. I just want it to sound as good as possible.
I have an ext cab '09, and need suggestions on fuse and wire gauge suggestions, as well as what sub will be the tightest sounding, and best match for the amp I've bought.
I'm going to be using my existing HU also. Again, any all suggestions welcome. Also, is it a good amp? Anyone using it?