Diff cover
Looks good.
When I did mine, luckily the trans was out and a new slave and clutch was installed, anywho, when I was doing the swap, I popped off the cover, sandblasted all the old paint off, used self etching primer 4 light coats, about 8 coats of dublicolor chrome, and about 15-20 light coats of glass clear coat. I've had alot of bad luck in the past with that "chrome-in-a-can" crap. It's been on the truck for 20k and it's holding up VERY well.
Throw some clear on that biatch.!
When I did mine, luckily the trans was out and a new slave and clutch was installed, anywho, when I was doing the swap, I popped off the cover, sandblasted all the old paint off, used self etching primer 4 light coats, about 8 coats of dublicolor chrome, and about 15-20 light coats of glass clear coat. I've had alot of bad luck in the past with that "chrome-in-a-can" crap. It's been on the truck for 20k and it's holding up VERY well.
Throw some clear on that biatch.!
Thread
Thread Starter
Forum
Replies
Last Post
Clinton
Snapshots
15
Jul 6, 2011 03:11 PM





