same cab style and bed length... if you have a regular cab 7-foot bed then you need to find a driveshaft from one of those, and good luck on that, there weren't nearly as many of those from 98+ as there were in the 1st and 2nd gen trucks. It also will need to be from a 2wd truck with either the auto or manual tranny, whichever is in your 92 because the 2wd outputs are different on the two trannys. You will also need to remove the carrier bearing crossmember when you put in the one piece shaft.
'94 2.3L, M5OD, BW1354 manual, 4x4, 31x10.5 BFG A/Ts, 15x8 AR Chamber teflon rims, 7.5 4.10 lock-right w/disks, D44 SAS 4.10 aussie-locker, duff traction bars, electric fans, spintech muffler, duff poly body mount bushings, Lightforce RMDL140's, cobra 18wxst II, herculined floor, 375,XXX
'87 camaro 305 carbed (needs engine)
'92 subaru legacy 2.2L Turbo (needs tranny)
TRS Tech Support Staff