help, transfer case stuck in 4x4High
#1
help, transfer case stuck in 4x4High
hey guys, please help me, i bought a second ranger to upgrade from the first, and one of the kinks in this one, is that it has electronic shifter for the 4x4. i try to dis-engage the 4x4 and nothing happens, its stuck, the "4x4" light is on, and it wont even shift into 4 low, there was a brown wire on the transfer case that wasnt connected to the harness, so i took a joint connector and connected it to the opposing brown wire, and nothing. please help, need the new ranger on the road quickly!
~Kev.
~Kev.
#2
Not sure what year you got.
Remove the shift motor and turn the **** back to 2wd. Your issue lies in the shift motor itslef. Check the fuses , then clean or replace the shift motor.
Servicing A Transfer Case Shift Motor
Remove the shift motor and turn the **** back to 2wd. Your issue lies in the shift motor itslef. Check the fuses , then clean or replace the shift motor.
Servicing A Transfer Case Shift Motor
Thread
Thread Starter
Forum
Replies
Last Post
erock
2.9L & 3.0L V6 Tech
2
11-17-2006 06:04 PM