Drivetrain Tech General discussion of drivetrain for the Ford Ranger.

2005 ranger edge trans capacity

Thread Tools
 
Search this Thread
 
  #1  
Old 01-14-2008
t gavin's Avatar
Member
Thread Starter
Join Date: Nov 2007
Location: crete, il
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
2005 ranger edge trans capacity

greetings all and happy 2008,
some info please, what is the REFILL capacity for a trans fluid and filter change on a 2005 ranger edge 2WD, 3.0, V-6 motor with an automatic 5 speed O.D. transmission? maintenance guide gives a DRY fill capacity but says nothing about a fluid/filter change capacity. seems like dealers and lube joints always overfill. any and all info is much appreciated, thanks, your fellow ranger, tom
 
  #2  
Old 01-14-2008
Join Date: Nov 2005
Location: Charlestown, IN
Posts: 1
Likes: 0
Received 4 Likes on 4 Posts
it can vary......start with 3 quarts and then check the level....fill from there...
 
  #3  
Old 01-14-2008
SB05EDGE's Avatar
Member
iTrader: (1)
Join Date: Nov 2007
Location: Midland, Texas
Posts: 534
Likes: 0
Received 0 Likes on 0 Posts
pulled off of alldata:

NOTE: When filling a dry transmission and converter, start with a minimum of 3.7 liters (4 quarts). With the engine running and the transmission at normal operating temperature 66-77°C (150-170°F) , check and adjust the transmission fluid level and check for any leaks. If fluid is needed, add fluid in increments of 0.24 liter (0.5 pint) until the correct level is achieved (fluid should be in the cross-hatched area of the fluid level indicator).
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BlackRanger04
4.0L OHV & SOHC V6 Tech
17
12-09-2022 02:13 PM
Ftirish86
Drivetrain Tech
2
10-18-2011 10:44 PM
Majck123
4.0L OHV & SOHC V6 Tech
6
08-20-2010 12:14 AM
Goodysgotacuda
Drivetrain Tech
26
11-20-2008 02:46 PM
t gavin
Drivetrain Tech
0
01-29-2008 12:14 PM



Quick Reply: 2005 ranger edge trans capacity



All times are GMT -6. The time now is 01:02 PM.