i have a 94 xlt w/ stock 7.5 3.45s w/ 9'' brakes, im running 33's on it & need to go to 4.10s. does any body know if a compete rear axle from a 2000 or up to 2006 8.8 4.10s with 9'' brakes would bolt on directly to my truck. im hoping so because i found 00, 03 & 06 pretty cheap . thanks ranger94 mike

 

im not real sure, but im wanting to say yes. btw how much are the rear ends? cause i need one lol

 

I believe they should, you might need new u bolts though.

 

the 2000 is 180 bucks and the 2003 was 220. not bad considering new gears & bearing set will cost more than that not to mention the cost of labor if you had to pay to get them put in.

 

the 8.8 will bolt right up you will need new ubolts the ones from your 7.5 wont work also the 8.8 has 10" rear brakes so count that as another plus trom the swap

 

that sounds good, i m going to get them soon as possible and get to work, ill let you know how it turns out, thanks for the replies , this forum is great.

 

im looking into doing the swap as well but what ive been priced so far is about $500 for a 8.8 l/s with 4.10's

 

man, california !!! good ole va, tons of rangers here. i ve drove toyotas, chevys and dodges. gotta say my little ranger is a blast to just get out and go in.