something messed up inside my master cyl and caused the piece from the pedal to the master cyl to break.

so now i need to get my master cyl out and there is no way to unhook the line to the slave from the master cyl.


idea are needed now please


thanks

 

On the side of the master where the line goes in is a straight pin that needs to be pushed out. About 1/16 diameter.It catches a lip on the end of the line.Right behind the o-ring.
I will be a PITA given the position.

 

^^ yea i know how it comes out but there is no way to get a punch and hammer in there with out removing the brake booster and brake master. i wanted to take the line of the tranny so fish the line out and take the line off the master on the bench but. it looks like plans are going to change

 

It's only in plastic,so, if you have a finish nail cut it down to 1/8 inch from the head.
Now dexterity will help.
Place the nail on the pin and sqweeze it in with pliers, as if you are replacing the pin with the nail ,pushing the pin out.
Pull the nail head back out and pull the pin with the pliers.

 

i just took the booster off gives you tons of room to work with small price to pay for all the room