Drivetrain Tech General discussion of drivetrain for the Ford Ranger.

Tire Locked up solid! 1 mile!!

Thread Tools
 
Search this Thread
 
  #1  
Old 03-05-2009
Blackonblackfx4's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 914
Likes: 0
Received 1 Like on 1 Post
Tire Locked up solid! 1 mile!!

SO I was on the Ice, in 2wd with my 2003 Fx4. And had like no traction at all. So when I went to go my diff locker must have been hooking up right??

But Then the rear passenger tire was totally locked up it wouldnt even spin, In reverse it would move. But as soon as you went forward it just locked right up.

It didnt matter if you were in 4 or 2 wd if i backed up or anyhting. when i went forward she was locked.

I basicly drove my truck like a crab sideways for a mile untill I hit the pavement and it hooked up hard and started spinning again.



WTF!!!!!!!!!!

What is it the Brakes ? the diff???? ???

Should my diff locker lock like that?
 

Last edited by Blackonblackfx4; 03-05-2009 at 04:43 PM.
  #2  
Old 03-05-2009
seed60's Avatar
RF Veteran
iTrader: (15)
Join Date: Jun 2008
Location: Mooresville, NC
Posts: 5,584
Likes: 0
Received 0 Likes on 0 Posts
Sounds like the drums brakes locked up.
 
  #3  
Old 03-05-2009
FordGuy302's Avatar
Member
Join Date: Feb 2009
Location: Chelsea,AL
Posts: 562
Likes: 0
Received 0 Likes on 0 Posts
Breaks? do you mean Brakes like for stopping and will it go forward now?
 
  #4  
Old 03-05-2009
Blackonblackfx4's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 914
Likes: 0
Received 1 Like on 1 Post
YEah ment brakes. Yeah now that tires spinning normally, except it have me a little jolt on the way home, I think it was my diff at least
 
  #5  
Old 03-05-2009
Blackonblackfx4's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 914
Likes: 0
Received 1 Like on 1 Post
Why would my brakes lock up?? Like it was bad! I was almost stranded out there
 
  #6  
Old 03-05-2009
FordGuy302's Avatar
Member
Join Date: Feb 2009
Location: Chelsea,AL
Posts: 562
Likes: 0
Received 0 Likes on 0 Posts
IDK if its spinning now ok sounds more like your brakes diff problems usually dont just go away
 
  #7  
Old 03-05-2009
Blackonblackfx4's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 914
Likes: 0
Received 1 Like on 1 Post
The diff locker couldnt get stuck then? and finnally release when you hit pavement
 
  #8  
Old 03-05-2009
Rolldogg's Avatar
Member
Join Date: Jan 2006
Location: Ottawa, Ontario
Posts: 3,424
Likes: 0
Received 3 Likes on 3 Posts
Check your rear drum. On pavement you have some grip, so there's enough friction to get the tire to rotate. On ice, there's not enough friction to get your rear wheel to rotate. Sounds like a hung up drum. Check your wheel cylinder, could be seized up. I know the wheel cylinders seizing up are a common with any year Ranger. Mine has had its share of issues with the rear drums.
 
  #9  
Old 03-05-2009
Downey's Avatar
RF Veteran
iTrader: (1)
Join Date: Oct 2007
Location: Muncy, PA
Posts: 8,470
Likes: 0
Received 6 Likes on 6 Posts
deffinatly the breaks check your ebreak lines to see if they have cracks in the covers mine stick some times then i pull on the lines and they lossen up
 
  #10  
Old 03-05-2009
seed60's Avatar
RF Veteran
iTrader: (15)
Join Date: Jun 2008
Location: Mooresville, NC
Posts: 5,584
Likes: 0
Received 0 Likes on 0 Posts
lol
 
  #11  
Old 03-05-2009
mossyoak03's Avatar
Member
iTrader: (1)
Join Date: Oct 2006
Location: Virginia Beach, VA
Posts: 193
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Downey
deffinatly the breaks check your ebreak lines to see if they have cracks in the covers mine stick some times then i pull on the lines and they lossen up
thats not bc you have cracks in the plastic around the cable. thats bc your not releasing the brake all the way. to fix that tighten your ebrake cable. or pull on on the pedal.
 
  #12  
Old 03-05-2009
Jimmeh's Avatar
Member
iTrader: (1)
Join Date: Dec 2007
Location: Columbia Falls, MT
Posts: 3,224
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Downey
deffinatly the breaks check your ebreak lines to see if they have cracks in the covers mine stick some times then i pull on the lines and they lossen up
........

If you didn't engage the e-brake, that probably has nothing to do with your problem. As Rolldog said, check the cylinders, and the drums.
 
  #13  
Old 03-05-2009
04blackedge's Avatar
RF Veteran
iTrader: (13)
Join Date: Jan 2007
Location: Durham, NC
Posts: 23,426
Likes: 0
Received 6 Likes on 6 Posts
Yep check to make sure fluid isn't leaking out of your drums too, you might have messed up a wheel cylinder with all that mess. Also you have a LS not a locker, 2 totally different things.
 
  #14  
Old 03-05-2009
mossyoak03's Avatar
Member
iTrader: (1)
Join Date: Oct 2006
Location: Virginia Beach, VA
Posts: 193
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 04blackedge
Yep check to make sure fluid isn't leaking out of your drums too, you might have messed up a wheel cylinder with all that mess. Also you have a LS not a locker, 2 totally different things.
and maybe the axle seals
 
  #15  
Old 03-05-2009
Downey's Avatar
RF Veteran
iTrader: (1)
Join Date: Oct 2007
Location: Muncy, PA
Posts: 8,470
Likes: 0
Received 6 Likes on 6 Posts
Originally Posted by mossyoak03
thats not bc you have cracks in the plastic around the cable. thats bc your not releasing the brake all the way. to fix that tighten your ebrake cable. or pull on on the pedal.
to bad my petal is all the way up every time and its tight
 
  #16  
Old 03-05-2009
mossyoak03's Avatar
Member
iTrader: (1)
Join Date: Oct 2006
Location: Virginia Beach, VA
Posts: 193
Likes: 0
Received 0 Likes on 0 Posts
then you need to replace your rear brake hardware if its causing problems like that. and how is it tight if you pull on the line and it releases them?
 
  #17  
Old 03-05-2009
Jimmeh's Avatar
Member
iTrader: (1)
Join Date: Dec 2007
Location: Columbia Falls, MT
Posts: 3,224
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Downey
to bad my petal is all the way up every time and its tight
Try pulling on the pedal when it's all the way up.

Or, with the truck STOPPED (AKA NOT MOVING), lean out, reach under, and pull the cable on the side of the rocker panel if your e-brake cable is not disengaging, which I am almost positive is NOT the OP's problem.
 
  #18  
Old 03-05-2009
Blackonblackfx4's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 914
Likes: 0
Received 1 Like on 1 Post
I'm not gunna lie, We did use the E break on the ice, But released it after.

So maybe the E break stuck on that side? but it finnaly released when i hit good enough tracktion?

It seams good now.
 
  #19  
Old 03-05-2009
Blackonblackfx4's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 914
Likes: 0
Received 1 Like on 1 Post
After that on ice, It rotated properly seamed like a one time thing ( I hope)
 
  #20  
Old 03-05-2009
Jimmeh's Avatar
Member
iTrader: (1)
Join Date: Dec 2007
Location: Columbia Falls, MT
Posts: 3,224
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Blackonblackfx4
I'm not gunna lie, We did use the E break on the ice, But released it after.

So maybe the E break stuck on that side? but it finnaly released when i hit good enough tracktion?

It seams good now.
Then that could be what it was.

But to be positive, I would still check the rest of the stuff.
 
  #21  
Old 03-05-2009
Blackonblackfx4's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 914
Likes: 0
Received 1 Like on 1 Post
Im bringing it to Ford tommorow at 3:15 anyways Do you think I should get them to look over it? like anything specific?

The guy I bought it off of said he changed all the seals in the rear end.
 
  #22  
Old 03-05-2009
99offroadrngr's Avatar
TOYOTA
iTrader: (37)
Join Date: Jul 2007
Location: Massachusetts
Posts: 11,713
Received 9 Likes on 8 Posts
it probably locked up on the ice and not on the road because there is less friction between the tire and the ground. put it this way, if you slam the brakes in snow they lock up but on dry pavement they shouldn't as easily. I just serviced both my rear drums right wheel had a f'ed up wheel cylinder and the left one was broken causing the broken piece to rub and make a smell lliek burnt wires. its more than likely your drum man
 
  #23  
Old 03-05-2009
darkstar_420's Avatar
Member
Join Date: Feb 2008
Location: sk
Posts: 621
Likes: 0
Received 1 Like on 1 Post
if you were on ice chances are its cold out, and more then likely you do not use your ebrake often so 1 of 2 things could have happened, 1) ebrake just locked up from lack of use 2) the ebrake created heat inside of the drum then was quickly cooled off due to the temp outside locking the ebrake on until you caught traction on the pavement breaking it loose
 
  #24  
Old 03-05-2009
Rolldogg's Avatar
Member
Join Date: Jan 2006
Location: Ottawa, Ontario
Posts: 3,424
Likes: 0
Received 3 Likes on 3 Posts
So you DID use the ebrake!!! AH HA!! LOL

j/k

Chances are, your ebrake cable hung up because your rear wheel cylinder are seized up. Happened to me a few times.......the shop I used to go to used wrong sized drums and ebrake cables that were too long, causing the self adjusters to NOT properly work and causing the wheel cylinders to seize and the internal drum springs grenade. NOT FUN.
Just watch what Ford says though. Chances are they'll try to sell you on replacing both rear spring kits, wheel cylinders, brake shoes, and possibly either have the rear drums turned or replaced. Just be careful, the dealerships are good, but they like to fish for money. LOL
 
  #25  
Old 03-05-2009
Blackonblackfx4's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 914
Likes: 0
Received 1 Like on 1 Post
How long should my drum brakes last??? what about the front?

Yeah I very soon relized I cant drift with a E break good like my friends with a 2d Hatch civic. But he cant go in snow or mud ! lol

Every so often when I switch into and out of 4x4 though latly its been making the vehicle joilt and make a little noise.

Like i let off the gas swtich in and I start going and it feels like your in 4x4 and then it jolts hard and bangs, kinda freaked me out tonight.

and did that earler the other way switching out, It Jolted the vehicle and kicked out...

T case or the vacume hubs???
 


Quick Reply: Tire Locked up solid! 1 mile!!



All times are GMT -6. The time now is 12:51 AM.