Drivetrain Tech General discussion of drivetrain for the Ford Ranger.

Slip bump in the driveshaft or trans?

Thread Tools
 
Search this Thread
 
  #1  
Old 01-02-2007
zabeard's Avatar
who?
Thread Starter
iTrader: (8)
Join Date: Nov 2004
Location: IN
Posts: 26,044
Likes: 0
Received 10 Likes on 10 Posts
Slip bump in the driveshaft or trans?

well i know its been discussed before but when i come to a stop waiting at a light and then take off again feels like something slips then i get a bump in the drive train.

Only thing I'm wondering is if it is a trans problem or the slip yoke on the drive shaft.
wouldnt surprise me one bit if it is the trans but since this new drive shaft that is when i have noticed all the issues.
Any input? Does it all the time, unless i accelerate at an extremely slow rate.
 
  #2  
Old 01-02-2007
V8 Level II's Avatar
RF Veteran
iTrader: (4)
Join Date: Nov 2004
Location: Michigan
Posts: 7,910
Likes: 0
Received 23 Likes on 20 Posts
It's usually the slip yoke splines.
 
  #3  
Old 01-02-2007
zabeard's Avatar
who?
Thread Starter
iTrader: (8)
Join Date: Nov 2004
Location: IN
Posts: 26,044
Likes: 0
Received 10 Likes on 10 Posts
Did i read that you greased yours before bob?
 
  #4  
Old 01-02-2007
Join Date: Jun 2004
Location: Exit 105 New Jersey
Posts: 2,409
Likes: 0
Received 0 Likes on 0 Posts
ahhh, the call of the slip yoke
 
  #5  
Old 01-02-2007
V8 Level II's Avatar
RF Veteran
iTrader: (4)
Join Date: Nov 2004
Location: Michigan
Posts: 7,910
Likes: 0
Received 23 Likes on 20 Posts
Originally Posted by zabeard
Did i read that you greased yours before bob?
I did regrease the slip yoke on my Trailhead (2WD) but it only helped for about 2 months. Ford sells a special PTFE grease for the slip yoke and that's what I used ($25/can!). When my LII started doing it, I slapped on a set of JD's and it has never done it since.

2WD is easy because the slip yoke just slides out of the trans tailhousing. The 4x4 yoke is more of a hassle. It's in the main driveshaft and you need to pull the accordion boot to grease it. From the factory, the boot is held on by special crimped clamps that take a special tool to set them.
 
  #6  
Old 01-02-2007
zabeard's Avatar
who?
Thread Starter
iTrader: (8)
Join Date: Nov 2004
Location: IN
Posts: 26,044
Likes: 0
Received 10 Likes on 10 Posts
I think my first attempt will be to complain to the company that made my driveshaft...

Maybe they could put some type of grease fitting in it.

I guess that is where i will start, was just worried that it could be tranny.

Thanks!
 
  #7  
Old 01-02-2007
graniteguy's Avatar
Member
iTrader: (3)
Join Date: Jul 2005
Location: Texas
Posts: 3,221
Likes: 0
Received 1 Like on 1 Post
my mustang does that when I'm at the track.
 
  #8  
Old 01-02-2007
Join Date: Nov 2005
Location: Charlestown, IN
Posts: 1
Likes: 0
Received 4 Likes on 4 Posts
my truck does that every now and again........i think it is my tranny starting on its last leg...
 
  #9  
Old 01-02-2007
rngprerunner's Avatar
Member
Join Date: Jun 2004
Location: Long Beach CA
Posts: 3,453
Likes: 0
Received 6 Likes on 5 Posts
My truck does that EXACT same thing Zach. It is rediculous and I have been chasing it for years.

The only time I have ever gotten it to go away was when I greased the slip yolk and changed u-joints... so I guess that is what it is.. though I also suspect the trans could be the problem too..

Just felt like adding to the topic... not that it helps.. lol..
 
  #10  
Old 01-02-2007
zabeard's Avatar
who?
Thread Starter
iTrader: (8)
Join Date: Nov 2004
Location: IN
Posts: 26,044
Likes: 0
Received 10 Likes on 10 Posts
Originally Posted by rngprerunner
My truck does that EXACT same thing Zach. It is rediculous and I have been chasing it for years.

The only time I have ever gotten it to go away was when I greased the slip yolk and changed u-joints... so I guess that is what it is.. though I also suspect the trans could be the problem too..

Just felt like adding to the topic... not that it helps.. lol..

i can tell we are all hoping its not the trans. lol
 
  #11  
Old 01-02-2007
jrpro130's Avatar
RF Veteran
iTrader: (1)
Join Date: Sep 2005
Location: Florida
Posts: 5,057
Likes: 0
Received 1 Like on 1 Post
Just pray it's not the trans
 
  #12  
Old 01-02-2007
04lvl2's Avatar
RF Veteran
Join Date: Jun 2004
Location: Palm Bay, FL
Posts: 5,600
Likes: 0
Received 0 Likes on 0 Posts
ITS NOT THE TRANS lol, grease the slip yoke man and check your Ujoints for binding
 
  #13  
Old 01-02-2007
2002ranger's Avatar
Member
Join Date: Sep 2006
Location: Fayetteville, Arkansas
Posts: 164
Likes: 0
Received 0 Likes on 0 Posts
mine did this for a while, especially when it was cold, my tranny fluid was low and would contract in the cold..after the tranny fluid was topped off i started getting a really bad squeek or screech..ended up having to replace my torque converter.
 
  #14  
Old 01-03-2007
JoshK's Avatar
Member
Join Date: Sep 2006
Location: CC, Indiana
Posts: 3,832
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by zabeard
well i know its been discussed before but when i come to a stop waiting at a light and then take off again feels like something slips then i get a bump in the drive train.

Only thing I'm wondering is if it is a trans problem or the slip yoke on the drive shaft.
wouldnt surprise me one bit if it is the trans but since this new drive shaft that is when i have noticed all the issues.
Any input? Does it all the time, unless i accelerate at an extremely slow rate.

Just turn up the radio and it will all be good.
 
  #15  
Old 01-03-2007
zabeard's Avatar
who?
Thread Starter
iTrader: (8)
Join Date: Nov 2004
Location: IN
Posts: 26,044
Likes: 0
Received 10 Likes on 10 Posts
Originally Posted by 04lvl2
ITS NOT THE TRANS lol, grease the slip yoke man and check your Ujoints for binding

haha hey im just taking the lazy route right now, see what input everyone has
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
99offroadrngr
OLD - Engine & Drivetrain
0
05-13-2014 05:34 PM
StxDangerRanger
eBay & Craigslist Finds
0
05-16-2012 03:20 PM
wellcom2knoxvile
OLD - Engine & Drivetrain
2
08-23-2010 07:17 AM
zabeard
Drivetrain Tech
20
09-02-2007 07:31 PM
neocon
Drivetrain Tech
14
02-19-2006 10:17 PM



Quick Reply: Slip bump in the driveshaft or trans?



All times are GMT -6. The time now is 07:09 AM.