10.25" Summit Rotors + Hawk Pads
#1
10.25" Summit Rotors + Hawk Pads
As I went to look for upgraded rotors for my '98 B3000, I couldn't find any for the smaller 10.25" Rotors... not EBC, not Powerstop, not even NAPA! LOL!
As I looked on Summit's site, they showed their own branded rotors, slotted and drilled. I did'nt wanna go drilled but for $75/ea. I said.. eh, what the heck!
Anyway, here's what I got....
First, the Victim.
The Stuff
What came off
A couple'a shots installed
Wrecked the original bearing caps taking them off and, because it was Saturday afternoon and no Mazda/Ford parts dealers open, hadda make do with NAPA ones that weren't deep enough (bottomed-out on the spindle nose You can see I really tried to make them fit! LOL!) Anyway, I Hadda do sumthin!
So I made sure they were centered and clean and used some tacky gasket sealer to hold them 'til Monday when I can get some new ones from the dealer.
The silver chit is anti-seize for the threads and rotor nose, just to keep the rusting down.
As I looked on Summit's site, they showed their own branded rotors, slotted and drilled. I did'nt wanna go drilled but for $75/ea. I said.. eh, what the heck!
Anyway, here's what I got....
First, the Victim.
The Stuff
What came off
A couple'a shots installed
What's with that Red chit, Raoul?
So I made sure they were centered and clean and used some tacky gasket sealer to hold them 'til Monday when I can get some new ones from the dealer.
The silver chit is anti-seize for the threads and rotor nose, just to keep the rusting down.
Last edited by RaoulR; 03-13-2010 at 10:31 PM.
#5
Actually, it shows them as 10.281
Left Side
Right Side
Edit: Wow, they went up 5 bux since I ordered them Wednesday!
I started this thread to maybe help peeps out that were looking for an upgrade to the smaller sized rotors. Lord know it needs the help, the stockers kept warping!
Left Side
Right Side
Edit: Wow, they went up 5 bux since I ordered them Wednesday!
I started this thread to maybe help peeps out that were looking for an upgrade to the smaller sized rotors. Lord know it needs the help, the stockers kept warping!
Last edited by RaoulR; 03-13-2010 at 10:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ford93
General Ford Ranger Discussion
0
05-10-2012 09:17 PM
barrman
General Ford Ranger Discussion
32
07-15-2005 11:55 AM
barrman
General Ford Ranger Discussion
18
06-03-2005 10:41 AM
FoMoCoFiddy
General Ford Ranger Discussion
43
02-09-2005 09:34 AM