D44 Interchanging Parts
#1
D44 Interchanging Parts
I have the following
76 F150 D44 that had cast C wedges welded to it, 5on5.5 lug HP axle.
and
78-79 F250 D44 HP, leaf spring, 8lug HP Axle.
After some research I have found some info on the axle shafts that makes me question some compatibility.
I am wanting to use the 76 axle housing and the 78-79 Outers.
Here is what I gathered
So it appears the shafts inners are different lengths, so does that mean i can use the shafts from the 76 with the 78-79 outers? (i hope)
I would think so but when i am looking for bearings and such for the outers on the 78-79 there is some confusion on bearing size and such.
Any help is appreciated.
Also I got my info from here.
http://www.zabeard.com/images/edgepi...hafts_Ford.gif
76 F150 D44 that had cast C wedges welded to it, 5on5.5 lug HP axle.
and
78-79 F250 D44 HP, leaf spring, 8lug HP Axle.
After some research I have found some info on the axle shafts that makes me question some compatibility.
I am wanting to use the 76 axle housing and the 78-79 Outers.
Here is what I gathered
So it appears the shafts inners are different lengths, so does that mean i can use the shafts from the 76 with the 78-79 outers? (i hope)
I would think so but when i am looking for bearings and such for the outers on the 78-79 there is some confusion on bearing size and such.
Any help is appreciated.
Also I got my info from here.
http://www.zabeard.com/images/edgepi...hafts_Ford.gif
#2
i don't think you will be able to use the inners from the '76 axle on the '79 axle.....the reason is the '76 is too long......i could be wrong though......
if it were my axle, i would order new axles for it......contact Moser Engineering (they are pretty close to you) about new axles.....when i priced them last year for a narrowed 9" rear end i think they were $100 each.......
or you could even have them shorten the axles for you....they can do that also and respline the axles...
if it were my axle, i would order new axles for it......contact Moser Engineering (they are pretty close to you) about new axles.....when i priced them last year for a narrowed 9" rear end i think they were $100 each.......
or you could even have them shorten the axles for you....they can do that also and respline the axles...
#3
Thread
Thread Starter
Forum
Replies
Last Post
QWIKSNK
Drivetrain Tech
24
06-26-2006 09:05 PM