Ring and pinion question..
#1
#4
Pinion and carrier bearings, shims and so forth are all the same between the two Ford 8.8 designs (31 vs. 28 spline).
The difference occurs when you get out to the ends of the tube. The axle tubes are larger for the 31 spline as are the axles so the axle bearings and seals are different.
As long as your kit focuses on the differential and not the axle end, they are all the same. Not saying quality is all the same, lol. Get like Timken bearings vs. no name brand and of course you're getting a better kit.
The difference occurs when you get out to the ends of the tube. The axle tubes are larger for the 31 spline as are the axles so the axle bearings and seals are different.
As long as your kit focuses on the differential and not the axle end, they are all the same. Not saying quality is all the same, lol. Get like Timken bearings vs. no name brand and of course you're getting a better kit.
#5
#6
Unregistered User
Posts: n/a
so your gonna get hosed when you call 4wheel parts lmao!
and your gonna get cheap parts!
www.reiderracing.com
please check these guys out
and your gonna get cheap parts!
www.reiderracing.com
please check these guys out
#9
Thread
Thread Starter
Forum
Replies
Last Post
jdcrush
Engine & Drivetrain
6
09-23-2014 10:08 AM
legoms013
OLD - Engine & Drivetrain
15
01-29-2012 01:50 PM