Hey guys I'm having issues with my 4 low. I used it before I took it into ford for the wiper arm replacement (00b40) and now I only have 4 high. I've checked some fuses and haven't found much resolution.

My question is, where is the fuse or relay for 4 low specifically? Are there two different fuses in different locations?

 

take it back to ford...they might have screwed something up

 

I plan on it but I wanna make sure it's not a simple fuse or relay...

 

Make sure your following the right steps.

In neutral (or clutch in), stopped, foot on the brake, then switch to low.

 

Done several times, no success. It feels like it might be in 4 low but no clicking.

 

Easy way to tell would be drive in first. If by 10mph your at 4k rpm your in low.

Otherwise it will shift at 4mph when in drive.

I don't get a click, I get a bang or thud when it finished shifting.

 

Well the shafts bind up, but it drives like normal minus steering being a bit stiffer