Hub Assembly
#1
Hub Assembly
I have a 1999 Ford Ranger XLT 4x4. I am having to replace both front hub assemblies and I dont know what all is supposed to hold the hub assembly on. all that came in te box is a little plastic piece. Shouldn't there be a snap ring or something?
Last edited by Lugg; 09-09-2007 at 11:22 AM.
#2
Are you talking about the AVM hubs? If so, see:
https://www.ranger-forums.com/forum2...ad.php?t=29462
https://www.ranger-forums.com/forum2...ad.php?t=29462
#4
#5
The halfshaft is held in by an orange snap ring. I suggest buying a new one if you don't have the tools. As its easy to destroy the thing with out the right puller.
I got mine from here.
http://www.genuine-ford-parts.com/
I got mine from here.
http://www.genuine-ford-parts.com/
#9
Originally Posted by Lugg
i went to that site but i couldn't find anything on a snap ring. can you give a part number? or another place to order it from?
http://www.trademotion.com/partlocat...99&catalogid=2
Originally Posted by 99ranger4x4
do you just get it out via big snap ring pliers? or do u need some special ford tool?
#11
#12
#14
Originally Posted by 99ranger4x4
aye ok, so go to ford to get the tool? i need the one for the hub too, i dont want to snap the tabs that hold on the hub
this is retarded
this is retarded
I used a screwdriver. Just pry a little and turn and pry a little and turn.
Some penatrent may help.
On a side note. If your planning on keep the pvh stuff replace all seals on the knuckle, a leak will cause you to lose 4wd.
#15
Thread
Thread Starter
Forum
Replies
Last Post