Avm Manual Hub Install Help!!!
#1
Avm Manual Hub Install Help!!!
Well I Installed 1 Of My Avm Locking Hubs On My 98 Ranger Without A Glitch! Took 15 Minutes. When I Got To The Other Wheel, The Old Hub Was Froze Up With Rust And Dirt. I Tried To Pry It Loose And All That Happened Is The Whole Plasic Shell That Sticks Out Broke Off Flush Leaving All The Gears And Guts Intact Around The Spine. Now How Do I Get The Rest Of The Old Hub Out? Thanks
#2
#6
re
There is nothing to grab hold of. Its flush with the spline. The only possible solution I can think of is to drill a tiny hole in the hub gears and maybe get a aluminum screw started and use that to pull the rest of the hub guts out. maybe that will work. Its really caked up in there. Rust on the spline and on the hub guts. Its just froze up in there. when I pulled on the old hub, that whole black plastic part just broke off leaving the hub gears ect intact, flush with the spline.
#8
Thread
Thread Starter
Forum
Replies
Last Post