well i have a problem with my brakes. i have the rear abs light coming on about every other time i drive it.


well about 3 weeks ago i get new rotors and pad for the rear disc and yesterday i finally picked up my new front rotors and pads. well got everything installed and took it for a drive. well the brakes were spoungy as hell and werent working well at all. so this morning i bleed the brakes and they got better but.


the problem is i step on the brakes and the rears lock up but the fronts dont.


the truck had a new master cyl when the explorer axle was installed about a year ago.


94 ranger 4x4 4.0 5 speed

thanks for all the help guys

 

Nevermind you have an explorer axle and discs now...

 

yep

 

Did you bypass the ABS?

 

expoloder breaks

 

well it has to be the porpotioniong valve or or the front calipers but im betting its the valve. i replaced the master cyl today with a free one under life time warranty. so tomorrow im going to try and find the p valve and replace it.

 

anyone??????

 

its near the fuel filter. a little ways closer to the engine i think though. My abs light was on to. So i took the dash apart and took the bulb out. lol but thats cause i don't have money or care to fix the system.

 

its not my abs unit thats the problem

 

well i installed new caliper and it solved most of the problem. im going to run all new brake line and all new hoes here soon. that is about another 200 bucks in parts.