eBay / Craigslist Find: Ranger steering stabilizer, F-250 dana axles, built 302, 03 fx4 parts truck, etc. OH
#1
Ranger steering stabilizer, F-250 dana axles, built 302, 03 fx4 parts truck, etc. OH
BIG CRAIGLIST FIND DAY!!
Some reason everyone is selling good stuff. Instead of making multiple thread I'm just gonna make one.
----------------------------------------------
Ranger Steering stabilizer
Skyjacker single shock steering stabilizer. never used just opened the box. everything needed is there. $50
2000 Ford Ranger Gray Passenger Seat
I have a nice passenger seat for a ford ranger. Back support is great. Call or email Steve (440)781-5590 stangkisil917@aol.com $25
F-250 dana axles
Front and rear axles off of a 78 F-250 ranger, regular cab, camper special. After a bit of research, I believe that the front axle is a dana 44 and the rear is a dana 60. Unknown what the gear ratio is, if you know where to find that info e-mail me and i'll check it out. The rear axle has relativly new brake shoes and hardware, the front axle has good life left on the rotors and pads. You get everything that you see. Asking $675 obo
BRAND NEW CLASS 3 HITCH FORD RANGER CHEVY S10
selling a brand new made in USA Curt class 3 hitch. i bought it off the clearance rack at summit racing for $100 thinking it would fit my F250, it was marked "fits ford, chevy, gmc" but it fits the smaller trucks, just my luck. mounting holes measure 2ft 9 in wide center to center, which does fit 1980s and 90s ford ranger, not sure what else. sells for $150 brand new. asking $100OBO call/text Jon at 330 321 8393 NO EMAILS!!
BakFlip G2 tonneau Ford Ranger 6' shortbed
BakFlip G2 tonneau cover for a 1994-2010 6ft short bed. Used but pretty much brand new. Comes with all parts, install direction on BakFlip's web site. Bought it new for $700. asking $450
NOTE: the plastic clip to hold the prop bar is broken. a new one can be purchased (or maybe even sent to you free) from BakFlip. *COMES WITH FREE TAILGATE LOCKING MECHANISM!*
Ford 302 engine long block edelbrock cam
I have a 1973 Ford 302 long block, it cam out of a1973 Ford Ranger xlt. It was rebuilt by Mccallen engine shop in 1996 and it has 20k miles on it since the complete rebuild . It has new rings and bearings and everything was blue printed. I also rember they installed new cam bearings and they line honed the block. The engine runs great and will make someone very happy it runs great. It has the Edelbrock performer rpm kit in it and also has stud mount rocks . The heads have been machined and the studs have been installed and complete valvejob head rebuild. The engine has been sitting in dry storage and has been covered. It does have some surface rust nothing major just needs some tlc. I would like to get $350 or best offer I want to sell 330-464-1309 or txt me if you have any questions.
PIECE DE-RESISTANCE!!!
2003 ford ranger for parts
2003 ranger fx4 4x4 4.0 motor call or txt for parts u need (440)822-9032
I already texted this guy. IT IS NOT A LEVEL II. But it has barely been touched. It just sitting there. I'm getting more info but I told him some people might want some stuff off it. I will try to squeeze a picture outta him soon. He informed me that it was a rollover
Let me know if any is interested in this 03 FX4!!
Some reason everyone is selling good stuff. Instead of making multiple thread I'm just gonna make one.
----------------------------------------------
Ranger Steering stabilizer
Skyjacker single shock steering stabilizer. never used just opened the box. everything needed is there. $50
2000 Ford Ranger Gray Passenger Seat
I have a nice passenger seat for a ford ranger. Back support is great. Call or email Steve (440)781-5590 stangkisil917@aol.com $25
F-250 dana axles
Front and rear axles off of a 78 F-250 ranger, regular cab, camper special. After a bit of research, I believe that the front axle is a dana 44 and the rear is a dana 60. Unknown what the gear ratio is, if you know where to find that info e-mail me and i'll check it out. The rear axle has relativly new brake shoes and hardware, the front axle has good life left on the rotors and pads. You get everything that you see. Asking $675 obo
BRAND NEW CLASS 3 HITCH FORD RANGER CHEVY S10
selling a brand new made in USA Curt class 3 hitch. i bought it off the clearance rack at summit racing for $100 thinking it would fit my F250, it was marked "fits ford, chevy, gmc" but it fits the smaller trucks, just my luck. mounting holes measure 2ft 9 in wide center to center, which does fit 1980s and 90s ford ranger, not sure what else. sells for $150 brand new. asking $100OBO call/text Jon at 330 321 8393 NO EMAILS!!
BakFlip G2 tonneau Ford Ranger 6' shortbed
BakFlip G2 tonneau cover for a 1994-2010 6ft short bed. Used but pretty much brand new. Comes with all parts, install direction on BakFlip's web site. Bought it new for $700. asking $450
NOTE: the plastic clip to hold the prop bar is broken. a new one can be purchased (or maybe even sent to you free) from BakFlip. *COMES WITH FREE TAILGATE LOCKING MECHANISM!*
Ford 302 engine long block edelbrock cam
I have a 1973 Ford 302 long block, it cam out of a1973 Ford Ranger xlt. It was rebuilt by Mccallen engine shop in 1996 and it has 20k miles on it since the complete rebuild . It has new rings and bearings and everything was blue printed. I also rember they installed new cam bearings and they line honed the block. The engine runs great and will make someone very happy it runs great. It has the Edelbrock performer rpm kit in it and also has stud mount rocks . The heads have been machined and the studs have been installed and complete valvejob head rebuild. The engine has been sitting in dry storage and has been covered. It does have some surface rust nothing major just needs some tlc. I would like to get $350 or best offer I want to sell 330-464-1309 or txt me if you have any questions.
PIECE DE-RESISTANCE!!!
2003 ford ranger for parts
2003 ranger fx4 4x4 4.0 motor call or txt for parts u need (440)822-9032
I already texted this guy. IT IS NOT A LEVEL II. But it has barely been touched. It just sitting there. I'm getting more info but I told him some people might want some stuff off it. I will try to squeeze a picture outta him soon. He informed me that it was a rollover
Let me know if any is interested in this 03 FX4!!
#3
Post up the pics please.
BTW did you see my thread about the mirrors. I already broke one HAHAHA.
#4
Member
iTrader: (9)
Join Date: Feb 2010
Location: berea ohio
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Haha yea i did and hang on...
It would probably be easier for me to grab parts for people, i'm a little closer
(and i know exactly where it is, i bought my truck form the guy)
EDIT:
Here ya'll go
I HAVE THE F RIMS OFF OF THIS IF ANYONE IS INTERESTED
And on a side note, here is the fire truck we played in and he started it and couldn't figure out how to shut it off. So we called the fire department and they said they would have to look at it and they just said to run it out of gas. He ended up calling his boss and getting *****ed at.
It would probably be easier for me to grab parts for people, i'm a little closer
(and i know exactly where it is, i bought my truck form the guy)
EDIT:
Here ya'll go
I HAVE THE F RIMS OFF OF THIS IF ANYONE IS INTERESTED
And on a side note, here is the fire truck we played in and he started it and couldn't figure out how to shut it off. So we called the fire department and they said they would have to look at it and they just said to run it out of gas. He ended up calling his boss and getting *****ed at.
Last edited by Police Interceptor; 10-23-2010 at 10:57 PM.
#5
HAHAHAHA how can not be able to turn off a truck. Awesome.
Too bad that thing has a steppie. I really need a new bed. It'd be a good donor.
It's only got 77k on it. Could be my 4.0 right there. Too bad this isn't like 2-3 years from now when I'm ready to swap the engine.
Too bad that thing has a steppie. I really need a new bed. It'd be a good donor.
It's only got 77k on it. Could be my 4.0 right there. Too bad this isn't like 2-3 years from now when I'm ready to swap the engine.
Thread
Thread Starter
Forum
Replies
Last Post
jbc
Drivetrain Tech
0
06-20-2011 03:05 PM
Bs03fx4
OLD - Interior, Exterior, Electrical, & Misc.
15
12-14-2010 04:12 PM
2010ranger
General Ford Ranger Discussion
42
02-11-2010 10:15 PM
1996Ranger4x4SuperCabSTX
OLD - Engine & Drivetrain
4
11-30-2009 09:05 AM
1996Ranger4x4SuperCabSTX
OLD - Engine & Drivetrain
6
11-06-2009 10:46 AM