Checking Interest: Manual tcase, VT 200.....
#1
01-10-2011
Join Date: Jan 2005
Location: West Topsham, VT
Posts: 1,709
Likes: 0
Received 0 Likes
on
0 Posts
Manual tcase, VT 200.....
With the new F250 snowplow truck, I find no more use for this 1354 manual tcase. Was going to go into the Ex plow truck, but really no use now so I'd rather see it put to good use.
MIGHT save it as I will be getting the wife's Ranger come Spring, but not much interest in switching it out to manual (got enough on my plate for the foreseeable future).
Here's the info...
This was the setup I got from ChevySlayer about a year or so ago...
Come with linkage and front driveshaft (dshaft needs centering ball, was supposed to get it but never did)
Comes with 3 new u joints for shaft
Tcase has front yoke, NOT the "tulip" style of newer rangers.
I think it's from a 93/94, but not 100%
Case will need to be sealed (gasket or RTV) as it leaks a very small amount. It has seaped from the bottom in the year that it has sat in my garage, no use installing with doing the seals anyway IMO.
Pics will be up when the camera charges/anyone shows interest.
Looking to get 200 for the setup, not interested in shipping right now.
MIGHT save it as I will be getting the wife's Ranger come Spring, but not much interest in switching it out to manual (got enough on my plate for the foreseeable future).
Here's the info...
This was the setup I got from ChevySlayer about a year or so ago...
Come with linkage and front driveshaft (dshaft needs centering ball, was supposed to get it but never did)
Comes with 3 new u joints for shaft
Tcase has front yoke, NOT the "tulip" style of newer rangers.
I think it's from a 93/94, but not 100%
Case will need to be sealed (gasket or RTV) as it leaks a very small amount. It has seaped from the bottom in the year that it has sat in my garage, no use installing with doing the seals anyway IMO.
Pics will be up when the camera charges/anyone shows interest.
Looking to get 200 for the setup, not interested in shipping right now.
#2
01-10-2011
Damn wish you were closer, i was trying to pick it up off chevyslayer but could never get over to get it :/
#4
02-10-2011
Join Date: Jan 2005
Location: West Topsham, VT
Posts: 1,709
Likes: 0
Received 0 Likes
on
0 Posts
I'll try to get some tomorrow night after work or Sat at the latest. Any shots you need in particular?
#6
02-11-2011
Join Date: Jan 2005
Location: West Topsham, VT
Posts: 1,709
Likes: 0
Received 0 Likes
on
0 Posts
If you are interested, my neighbor is from Hamden and he has friends at his vacation house right now. Could save on shipping if you are near CT, if not he and his friends come up all the time, could easily throw it in the bed of their trucks.
#9
02-13-2011
Join Date: Jan 2005
Location: West Topsham, VT
Posts: 1,709
Likes: 0
Received 0 Likes
on
0 Posts
#11
03-19-2011
Join Date: Jan 2005
Location: West Topsham, VT
Posts: 1,709
Likes: 0
Received 0 Likes
on
0 Posts
Sold and on it's LONG journey to Jose in Argentina! Now they will have a diesel, 4 doors and manual tcases down there! If only I could get a diesel sent up here......
Thread
Thread Starter
Forum
Replies
Last Post
