i bought a disc brake conversion kit from dangerranger01 a while back and ended up not using it because i swapped a ford 9 inch axle in. so i need to sell the disc brake kit. I really need to sell and dont have time to check shipping rates so im just going with a flat cost for everyone! PICS ARE IN THE HOW-TO LINK AT THE BOTTOM
150 bucks shipped..
They are off a 95 Mustang GT. You have to cut the brackets so it'll fit on the inside of your axle flange. Its easy to do.
Caliper mounting bracket
Axle mounting bracket (the one you have to modify)
What you'll need to finish the swap:
Rotors of your choice
Pads of your choice
This is a much easier, cheaper, and better than an expo rear end for disc brakes. These will work on all 7.5" axles and the 28 spline ranger 8.8" axle.
Here is the link to the HOW-TO for this kithttp://www.ranger-forums.com/forum2/...ion-stock.html
it is the same kit minus the painted calipers.
i am in seattle washington until january 3rd. then i will be taking the kit with me down to corvallis oregon and will have it with me there. so if anybody in oregon wants it too..