Here are some pics for ya !
Let start off with Labels, one plastic stuck to the end and the other a Tag attached with a bolt.
US Patent #: 4,440,042
The next three are general picture, yes it is a transfer case:
The next three show the linkage, first one a little closer showing the sprayed on penetrating oil, the next two show different positions of the linkage and yes it moves smoothly.
The last one shows the Speed Sensor, (at least I think it is called the speed sensor), the straight one that is needed in this application and can not be purchased from Ford (I think).
The sensor came with the pkg and without a screw so one is needed.
That’s All Folks !
I hope this will help you out, not knowing what was being sold !
4x4, 5sp, Std Cab, Stepside, E4 Red
4” Lift - Coil-Overs, 6” SkyJacker Leafs - No Blocks (Mistake)
31 Spline FX4 Rear Axle, 4.56s and OX Locker, Hurst Shifter w/Optional Stick and "Made by Grev" alignment adapter