how to take ford emblem off tail gate
#1
#2
i did it not too long ago , some fishing line and some gloves and get in between the paint and the emblem start back moving the line back and forth , it will take awhile and not seem like its doing nothing , but it is and mine came off with no paint removed
o and you will brake the line every now and them so get a roll
o and you will brake the line every now and them so get a roll
#3
i did it not too long ago , some fishing line and some gloves and get in between the paint and the emblem start back moving the line back and forth , it will take awhile and not seem like its doing nothing , but it is and mine came off with no paint removed
o and you will brake the line every now and them so get a roll
o and you will brake the line every now and them so get a roll
#4
it was and it was held on by ...ummmm like plastic pins and the fishing line will cut though that ,.. i think it took me maybe a hour and half
#5
#6
i took the tail gate off and took it in side and worked in front of the TV,......i think that why it took so long i think the a.d.d. kicked in
Last edited by joshtank; 11-28-2009 at 03:45 AM. Reason: no sleep
#8
#10
all supposed to be held on by 3M tape.
#11
Go somewhere that has autobody supplies and get a fiber stick or wedge preferably, then you can just get underneath it and pry it off, just be careful not to put too much pressure trying to pry it or you can dent your tailgate. Thats how i get emblems off every day at work and how I got my oval off my tailgate in about 20 seconds. Dont waste an hour and a half trying to cut it off with fishing line, then you also wont have any line up pins when you go to put it back on.
Thread
Thread Starter
Forum
Replies
Last Post
Want to Buy: Tail gate for my 99 ford ranger
rtrev64
OLD - Interior, Exterior, Electrical, & Misc.
0
02-24-2013 09:52 AM
Jp7
OLD - Interior, Exterior, Electrical, & Misc.
5
08-01-2012 08:40 PM