Line of Fire question...
#1
Line of Fire question...
I've got an 01 Flareside and had ordered a Line of fire LED brake light for under the tailgate from someone who was fitting them specifically for the Flaresides. Mine has a few LED's that are out and I'd like to get a replacement but I can't remember where I ordered it from. Any ideas? I know it was a dealer on here if I remember correctly. I tried doing a search but couldn't find what I was looking for. Thanks!
#3
#4
Old Guy User…
iTrader: (12)
The amount you cut is minor and the fit is full width of the Steppie Bed.
Sealing it is the thing, you need a good “2-Part Epoxy”, mix it up according to instructions and put some in, tape the end and stand it on the end with the tape, let it dry.
Do the same for the other end once the Epoxy is dry.
Make sure the light strip fits before plugging the ends and be careful of the wirings and PCB when cutting.
This WILL work, you just need to be careful.
ltr/luck
Sealing it is the thing, you need a good “2-Part Epoxy”, mix it up according to instructions and put some in, tape the end and stand it on the end with the tape, let it dry.
Do the same for the other end once the Epoxy is dry.
Make sure the light strip fits before plugging the ends and be careful of the wirings and PCB when cutting.
This WILL work, you just need to be careful.
ltr/luck
Thread
Thread Starter
Forum
Replies
Last Post
WholesaleMN.com
General Ford Ranger Discussion
14
12-22-2004 05:29 PM