moon visor or sun visor brands that fit 2011?
#1
#4
#6
Old Guy User…
iTrader: (12)
The Ranger Visors made for 93 and up should fit.
What did you try out and why didn’t it fit ?
I have a lund visor off of a 97 and it fits my ’03.
Check Craig’s List or E-Bay, look for 93 and up.
The new ones, if you can find one, states up to 01, same cab as my 03 but not absolutely sure of the ‘11but I think so.
Luck on the hunt, took me a while to find one I liked and for the right price.
If getting used, watch the mounting hole and before painting touch up the mounting hole area.
What did you try out and why didn’t it fit ?
I have a lund visor off of a 97 and it fits my ’03.
Check Craig’s List or E-Bay, look for 93 and up.
The new ones, if you can find one, states up to 01, same cab as my 03 but not absolutely sure of the ‘11but I think so.
Luck on the hunt, took me a while to find one I liked and for the right price.
If getting used, watch the mounting hole and before painting touch up the mounting hole area.
#7
The Ranger Visors made for 93 and up should fit.
What did you try out and why didn’t it fit ?
I have a lund visor off of a 97 and it fits my ’03.
Check Craig’s List or E-Bay, look for 93 and up.
The new ones, if you can find one, states up to 01, same cab as my 03 but not absolutely sure of the ‘11but I think so.
Luck on the hunt, took me a while to find one I liked and for the right price.
If getting used, watch the mounting hole and before painting touch up the mounting hole area.
What did you try out and why didn’t it fit ?
I have a lund visor off of a 97 and it fits my ’03.
Check Craig’s List or E-Bay, look for 93 and up.
The new ones, if you can find one, states up to 01, same cab as my 03 but not absolutely sure of the ‘11but I think so.
Luck on the hunt, took me a while to find one I liked and for the right price.
If getting used, watch the mounting hole and before painting touch up the mounting hole area.
#9
#10
Old Guy User…
iTrader: (12)
Not sure where you are with this BUT NO on the rear add-on or at least in my opinion I vote NO !
I looked for a while trying to find an inexpensive Lund Windshield Visor.
Thanks to guys on this site I located one, wrong color and a few years on it but easily upgraded to E4/reinforced condition.
New, if you can find one new (93-01) it will run you over the $300 mark for the lighted unit and far less if you get it used.
Keep checking Craig’s List and eBay, they are out there you just need to connect.
#13
Old Guy User…
iTrader: (12)
I think 2001 is the last year there is an actual p/n for.
You need to see if that version fits your cab.
Std Visor, no lights, Model #12125
Moon Visor - Model # 19043
it says 93-01 but yeah they are the same as 03… not sure above that.
If you were a little closer to the Northeast you could try mine before it goes to the shop, TX is a little too far for a fitment run.
You need to see if that version fits your cab.
Std Visor, no lights, Model #12125
Moon Visor - Model # 19043
it says 93-01 but yeah they are the same as 03… not sure above that.
If you were a little closer to the Northeast you could try mine before it goes to the shop, TX is a little too far for a fitment run.
#15
Old Guy User…
iTrader: (12)
Yes they all do drill for screws.
Two Screws on the sides and four in the middle.
Use a decent sized screw, don’t go too small or they will pull out.
Maybe you could bolt on part of it and screw the holes you can't get to.
Get some Windshield adhesive and use that to mount it up with the screws.
The adhesive will fill in the thread area and seal the hole up.
My ’88 had one and it never leaked, used screws and windshield adhesive, my’03 will have one, but not sure about adhesive yet.
Maybe check with a local body shop, they may have some new 3M stuff.
Two Screws on the sides and four in the middle.
Use a decent sized screw, don’t go too small or they will pull out.
Maybe you could bolt on part of it and screw the holes you can't get to.
Get some Windshield adhesive and use that to mount it up with the screws.
The adhesive will fill in the thread area and seal the hole up.
My ’88 had one and it never leaked, used screws and windshield adhesive, my’03 will have one, but not sure about adhesive yet.
Maybe check with a local body shop, they may have some new 3M stuff.
Thread
Thread Starter
Forum
Replies
Last Post
Want to Buy: LUND MOON VISOR - TX
fenderpicks
OLD - Interior, Exterior, Electrical, & Misc.
0
09-25-2012 12:38 PM
Scrambler82
OLD - Interior, Exterior, Electrical, & Misc.
9
04-02-2012 06:59 AM
Want to Buy: 98 ranger moon visor. CHEAP! - OH
andrew_deaton
OLD - Interior, Exterior, Electrical, & Misc.
0
03-01-2012 07:51 PM