Got my kit in the mail the other day and finally got around to the install. It came with the 2 ballasts, 2 bulbs, and a relay harness. What confused me was with the harness. It had the pos/neg wires that i connected to the battery, the bulb connections which worked fine, then it only had 1 connection input for the stock headlight plug. Is there only suppose to be one stock headlight input? I have it all connected and i get no lights on hi or low. I looked on the ddm website under the HID harness option for the kit i bought and there is a dual in dual out option, was i suppose to get that? any help would be great.

 

your on the right track, it only needs one socket to signal the ballast to turn on... basically, it uses one plug as a switch to cut on the power to the 2 ballasts... Might wanna check your grounds though!

 

Got it working, thanks. I made sure all the plugs were tight and moved the ground. So, now the only question I have is with the high beams. When I push my turn signal lever forward to put the high beams on they work fine. When I pull it back to flash them they do nothing. Is this normal for the HID kit or should they be coming on?

 

I wouldn't flash them. You mean when going from High to Low they cut off?

 

With the Hi/Lo kit you can't flash, you get only Lo or Hi. You have everything wired up correctly.

 

I meant like how you can push the turn signal forward and it locks on high beam or you can pull the turn signal to manually keep the highs on. Casper pretty much answered my question though.

 

haha. Post some pics! lets see these HIDs

 

how do these HIDs work? are they not magnet based to pull the high beam back into the housing for the high beam?

 

How do you have your wires hooked up on the blue clip? For some reason mine will be high beams until I pull back and put the highbeam light on in the dash and then they'll go to low.

 

i want pics too...you have had plenty of time to put them up :P haha
I want HIDs again and am thinking the Hi/Lo kit this time...

 

id double check all the connections i have the same setup except for 55w and mine work fine exactly like the stock ones did so i would say you have a loose connection someewhere

 

so what you're saying is that i can pull back on the stick and flash people, push forward get Hi's?

 

yes i've done it several times. people think i have my hi's on so occasionly i decide to show them what my hi's actually look like.

 

I have the Hi/lo kit and can't flash people I can only push forward to get hi's

 

thats odd cause i can

 

hmmm how is yours wired? I have had it like that for a year now and haven't touched it

 

i dont remember its been a while since i put it on.

 

does anyone know where to get HID fog lights? because i cant find the correct bulb type at DDM or is there a different bulb type i need to get because the manaul says 9145 but i cant find that type in HID.

 

H10 is the bulb for our fogs from DDM

 

i flash the crap outta people.