BL+Exhaust
#1
Join Date: Jan 2008
Location: Elberton, GA
Posts: 695
Likes: 0
Received 0 Likes
on
0 Posts
#2
Rocky did it on his old Ranger. Why not just out the tips coming out in front of the right rear tire or just behind the rear tires at a 90*.
In front of the right rear tires:
DSC_0037-3.jpg?t=1198967462
In front of the right rear tires:
DSC_0037-3.jpg?t=1198967462
#3
i tried to get my dad to let me redo mine so they would come out in front of the rear tire but....they heat up the back tire causing it to wear faster....and he says longterm it will ruin the finish on the wheel
and also jake, i asked my dad if we could do it and he said that if there is only a 3" gap that we wont be able to do it b/c its a 3" tip and he doesn't want to do it b/c you know he guarantees no leaks and no rattles
and also jake, i asked my dad if we could do it and he said that if there is only a 3" gap that we wont be able to do it b/c its a 3" tip and he doesn't want to do it b/c you know he guarantees no leaks and no rattles
#4
I am not worried about the wheels and I don't really see the exhaust messing them up. I don't think the tire will wear faster either, not enough to notice anyway. That's just my opinion so take it as such, not fact.
#5
Join Date: Jan 2008
Location: Elberton, GA
Posts: 695
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
1994 Ranger XLT
SOHC - 2.3L & 2.5L Lima Engines
13
04-27-2012 03:28 PM