Hey guys
Few questions I was involved in a little fender bender and my front lower valance on my truck was damaged. On my truck now I have the valance that does not have the fog lights holes. I found one online with the fogs lights holes and I want to buy it and put it on my truck. Can it be done? And also it there a way I can find a harness for the fog lights to be used with a switch you can find at an auto parts store? Can someone please show me a picture example or point me in the right direction please?
Thanks Ben

 

The answer is yes.

 

I have been reading more on the forums and cat really find the wiring cable for the foglights. My truck has te conector for the lights on te back of the radio but I can't find them behind the bumper or grill idk what I am looking for exactly. If someone could show me a picture it will be apperciated. Thanks Ben

 

Alot of people install a switch under the dash. Positive and ground. You can pick where you get your power from fuse box or battery. Check any hardware store for the right wiring connector. Do it yourself, its pretty basic.

 

Actually no your not going to be able to get the valance with the fog holes, because the 4wd valance (With fogs) come up over the bumper at each end, where the 2wd ones do not...

 

What it I was just to cut off that back part that cones up over the bumper and just did a way to make my own screws to hold it in place. And does anyone know exactly what the connectors look like if there are any behind te grille or bumper I need to know what to look for thank you Ben

 

This is what i have on my 4x4 ranger now that is broken-
http://www.partstrain.com/store/deta...location=Front

This is what i want to replace it with. can i be made to fit on my ranger?http://www.partstrain.com/store/inde...=0&Ntt=Valance

 

In my opinion it wont look good if you cut it, but do what you want....

 

I think it will look okay and I think I found where thy go to it looks like on my brother truck they just seem like they are spiliced into another wire cause I can feel it and it connects to another wire I could be wrong idk but it looks like that's where it is