rocker rework
#1
Join Date: Apr 2008
Location: peking
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
rocker rework
ive finally had enough of the chrome rockers on my truck! they look good but just hold all the crap you dont want held next to your truck. im thinking of doing the bed liner thing. i dont want to spend 500 dollaqrs so im going to do it myself i think. any one use the parts store products? i know im not going to get the line x quality but i happy with just functionality. im thinking black but not sure how that would look either. tips and suggetions welcome. thanks guys!
#2
i think black will go right in with ur flares and such......idk what other people use but my dad got this stuff on ebay and u get enough for 2 coats on a truck bed for 170 bucks....3.5 gallons. u could probably get less to but it holds up well. on our 68 bronco we sandblasted the whole interior and sprayed one coat on it and so far it has held up really well even though we only did one coat. we used the rest on my dads truck and only lightly scuffed the surface on his 06 chevy 2500. it holds up alright on it but if u chip it the area around it peeles up prety easy cause it wasnt preped very well. also on the bronco we painted over some of it in orange and it looks really good and the paint stuck very well. this stuff is not really rubbery but its very hard and very ruff. just thought id mention it.
the stuff he used is called "LINER X-TREEME"
the stuff he used is called "LINER X-TREEME"
Last edited by t5cents; 07-21-2009 at 11:31 AM.
#3
#5
Join Date: Apr 2008
Location: peking
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
#6
Join Date: Apr 2008
Location: peking
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
#9
#11
I agree with Mike -
I haven't had my rockers done yet (my whole truck is getting repainted... so I'll decide what to do after that - different story), but I had my bed sprayed professionally by a local shop, and I'm VERY glad that I did that after seeing some DIY beds.
I haven't had my rockers done yet (my whole truck is getting repainted... so I'll decide what to do after that - different story), but I had my bed sprayed professionally by a local shop, and I'm VERY glad that I did that after seeing some DIY beds.
I had mine professionally sprayed - and a roll on or can wont cut it for rocker panels on the long term - sure it'll look great at first.. but wait for those rocks and water to start doing there thing and you'll wish you had a good rhino or line-x on there..!
UI plan on getting my own done here probably this summer too along with my otehr long list of stuff - and I will 100% bring it into a shop and pay the ~$500 to get it done in a heartbeat
#13
Thread
Thread Starter
Forum
Replies
Last Post
Johawk
4.0L OHV & SOHC V6 Tech
2
09-14-2004 08:31 PM